Features:
- Provides direct line-of-sight viewing of the selected burner flame.
- Uses solid-state UV, IR or combined sensing options within the SF810 family.
- Supports continuous self-check and flame-quality monitoring through the connected analysis system.
The current designation identifies the LOS installation arrangement; the full scanner order code determines detector spectrum, connector, housing and approval.
It supplies flame-presence and quality information for combustion supervision on utility and industrial burner systems with a suitable optical path.
Before installation, verify flame visibility, sight-tube geometry, cooling or purge provisions, connector wiring and the exact FAU810 channel configuration.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for ABB SF810-LOS:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supervises wall-fired boiler burners where the scanner can maintain a direct optical path to the assigned flame root.
- Supports industrial furnace and process-heater burner monitoring when the selected spectrum distinguishes the target flame.
- Provides flame-quality information to combustion-safety and operating systems through the associated analysis unit.
- The LOS sighting assembly must be aligned so the detector continuously views the target flame rather than refractory or an adjacent burner.
- Mounting hardware, isolation, purge air and cooling provisions must keep the scanner within its published mechanical and thermal limits.
- Connector and cable selection must match the ordered termination style and the assigned FAU810 or compatible interface channel.
- Applicable standard configurations provide IP66/IP67 protection when the approved connector, seals and assembly instructions are used.
- AISI 316 stainless-steel housing is available for demanding or offshore environments through the complete scanner order code.
- Ambient capability and hazardous-area suitability depend on the exact sensing and enclosure configuration shown on the nameplate.
- ATEX gas and dust approvals are available for designated Ex versions and apply only with the documented connector and accessories.
- General industrial versions carry the listed CE and enclosure ratings stated for the selected configuration.
- Certification markings must be checked on the complete scanner assembly rather than inferred from an SF810 family reference.