Features:
- 480 V duty: 22 A output supports 15 HP normal-duty or 10 HP heavy-duty operation
- Network role: embedded EtherNet/IP carries documented control and diagnostic data
- Exact build: Frame 2 open enclosure includes filtering, precharge, and a braking transistor
This catalog code identifies a specific 480 V PowerFlex 755 build rather than a generic 22 A replacement.
Its embedded network interface makes controller ownership, addressing, and loss behavior part of the drive's commissioning record.
Option cards and machine safety architecture remain installation-specific and must be checked from the existing unit before an outage.
Apter Power can support 20G11ND022JA0NNNNN label verification, official documentation, condition review, and exact-configuration quotation coordination.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Command path: record whether start, stop, direction, and reference arrive from the network
- Addressing: preserve IP settings, device name, switch path, and controller connection
- Loss response: test the documented network-fault action before production release
- Installed cards: identify every option by catalog number and slot
- Machine dependency: map feedback, I/O, safety, and auxiliary communication to the project
- Replacement scope: include only options proven necessary by the installed design
- Motor basis: enter verified nameplate and duty data
- Power stage: review supply, protection, grounding, braking, and output wiring
- Acceptance: prove direction, speed range, stop mode, faults, and restart behavior
- Coordinated machinery: integrate documented drive control with an EtherNet/IP controller
- Variable-torque loads: apply the supported normal-duty rating to matched equipment
- Heavy-duty machines: use the documented 10 HP duty after load and thermal review