Features:
- Filtered-only choice: N114 is the documented 25 HP configuration with no N104 counterpart
- Duty split: 18.5 kW normal duty or 15 kW heavy duty
- Installation class: Frame E requires screw mounting and planned handling
The suffix is not an optional description; it is part of the exact electrical identity for this power level.
That filter decision changes the questions asked about grounding, leakage current, residual-current protection, and the incoming supply.
The larger frame then adds handling and thermal work, so electrical and mechanical acceptance should be completed before network or safety commissioning begins.
Apter Power can verify 25B-D037N114 suffix identity, official documents, quotation scope, and filtered-drive sourcing requirements.
25B-D037N114 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Mandatory code: use N114 because Rockwell lists no non-filtered 25 HP configuration
- EMC path: keep the filter, cable, shield, and grounding design consistent
- Residual current: evaluate leakage and use Type B protection where an RCD is required
- Screw mounting: install the 12.9 kg drive on a structure designed for Frame E
- Fastener torque: use the published 6.0 to 7.4 N m range
- Cabinet layout: reserve the documented envelope, airflow, and service access
- STO architecture: combine the embedded function with the required safety components
- Power isolation: provide a separate compliant means for maintenance isolation
- Validation: test fault response and restart behavior after installation
- Normal-duty systems: control a supported 18.5 kW / 25 HP motor within the documented load class
- Heavy-duty systems: apply the 15 kW / 20 HP boundary for the required overload profile
- Networked machines: integrate the drive through supported EtherNet/IP control and diagnostics