Features:
- Compact identity: Frame B PowerFlex 525 for the documented 4 kW / 5 HP duty
- Catalog boundary: N104 denotes the non-filtered input configuration
- Control access: embedded EtherNet/IP supports documented command and diagnostic exchange
This catalog number is the smallest physical frame in the current batch, making its mounting format an immediate identification point.
Its network interface and safety input belong to the complete drive architecture; neither changes the motor-current or enclosure limits attached to the exact row.
Selection therefore starts with the full suffix and motor duty, then proceeds to cabinet, protection, and commissioning decisions without borrowing assumptions from a filtered unit.
Apter Power can review 25B-D010N104 identity, official documents, quotation details, and compact-drive sourcing requirements.
25B-D010N104 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Network role: use the embedded EtherNet/IP interface for documented drive integration
- Address record: preserve the commissioned IP settings with the machine files
- Fault boundary: separate network loss from drive or motor faults before hardware replacement
- Protection basis: select fuses or circuit breakers from the official 520-Series tables
- Source details: record voltage, available fault current, and local code requirements
- Stop condition: do not energize until disconnecting and protective devices are approved
- Mounting method: use the documented DIN-rail or screw-mount options for Frame B
- Thermal path: maintain the required airflow and ambient-temperature limits
- Grounding: connect protective earth and motor ground as shown in the installation instructions
- Standalone machines: apply variable-speed motor control within the documented 4 kW / 5 HP rating
- Simple integration: connect the drive to a supported EtherNet/IP control architecture
- Machine maintenance: retain exact drive and motor data for replacement and recommissioning