Features:
- Range position: 43 A is the highest documented output in this PowerFlex 525 group
- Filtered identity: N114 remains mandatory for the exact catalog configuration
- Load boundary: 22 kW normal duty and 18.5 kW heavy duty require different application profiles
The current rating, duty decision, and filtered suffix should stay together from the motor study through the purchase order.
At this power level, existing panel protection and source assumptions deserve a fresh review rather than automatic reuse from a lower-current drive.
Cooling, braking, network control, and safety validation can then be staged around the approved electrical design and the exact Series 1 label.
Apter Power can coordinate 25B-D043N114 exact-code inspection, official documentation, quotation, and high-power sourcing support.
25B-D043N114 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Normal duty: apply 22 kW / 30 HP only to the documented load class
- Heavy duty: use 18.5 kW / 25 HP where the overload profile requires it
- Current limit: keep the 43 A rating central to motor and cable selection
- Branch devices: use the exact official protection row and applicable code
- Supply conditions: review source impedance, fault level, disconnecting, and grounding
- Filter path: preserve the N114 EMC configuration and assess leakage-current effects
- Frame E cooling: calculate cabinet heat and airflow for the installed ambient
- Derating: apply published temperature and fan requirements when limits are exceeded
- Stopping energy: verify braking demand before selecting deceleration settings
- Higher-power machines: control supported motors up to the documented 22 kW normal-duty boundary
- Heavy-load machines: use the 18.5 kW limit where heavy-duty overload is required
- Integrated equipment: exchange supported control and diagnostic data through EtherNet/IP