Features:
- ACB listing for a non-18-pulse drive
- Conformal-coated Forge control-board description
- Dedicated part number distinct from the 18-pulse ACB
80190-560-02-R is anchored to the non-18-pulse converter arrangement documented by Rockwell Automation.
A visually similar ACB should not be accepted until the drive topology, complete label, and revision agree with the installed board.
The replacement file should preserve control connections, board position, fault history, and the service procedure used for recommissioning.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
Allen-Bradley 80190-560-02-R Non-18-Pulse Analog Control Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 80190-560-02-R Non-18-Pulse Analog Control Board Specs
General
- ManufacturerAllen-Bradley
- Model80190-560-02-R
- ConditionNew Original ready stock
- Product FamilyPowerFlex 7000 Medium Voltage AC Drives
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Converter matching
- Configuration: Confirm the installed drive is not the 18-pulse arrangement.
- Part-number boundary: Do not use the 18-pulse ACB ordering code.
- Board markings: Match revision and coating identification.
- Drive evidence: Keep topology information with the purchasing record.
Pre-removal record
- Connections: Photograph cable and connector locations.
- Position: Record the original control-board location.
- Faults: Capture alarms relevant to the analog-control section.
- Documentation: Use the service guide for the installed drive bulletin.
Commissioning sequence
- Inspection: Verify seating and connector engagement.
- Configuration: Restore documented parameters only.
- Diagnostics: Review drive status before enable.
- Acceptance: Complete the approved operational test.