- 4.0 A output for a 1.5 kW or 2 hp motor on a 380–480 V three-phase supply.
- Frame B IP20 open construction with an integral LED keypad and RS-485 communication.
- The N104 configuration has no CE-compliant EMC filter; when braking is required, the internal brake IGBT must be paired with a separately selected braking resistor.
22B-D4P0N104 is a PowerFlex 40 adjustable-frequency AC drive rated for a 1.5 kW or 2 hp motor, with 4.0 A output at 380–480 V AC three-phase input.
Its N104 configuration combines an IP20 open enclosure, integral LED keypad, RS-485 communication, programmable control I/O, and an internal brake IGBT without a CE-compliant EMC filter.
Before installing or replacing 22B-D4P0N104, confirm the motor current and overload settings, branch-circuit protection, control-logic arrangement, enclosure airflow, communication parameters, and braking-resistor requirements.
Availability, condition, price, and shipping time for 22B-D4P0N104 are confirmed during quotation.
Allen-Bradley 22B-D4P0N104 PowerFlex 40 AC Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Source and sink digital-input wiring modes are supported.
- Analog references include 0…10 V, 4…20 mA, and an external potentiometer.
- The internal PID loop can maintain process feedback such as pressure, flow, or tension.
- The integral RS-485 port communicates through the DSI protocol.
- Drive nodes use the documented shielded two-conductor network arrangement.
- Relay, opto-isolated, and analog outputs provide status and control integration.
- Electronic motor-overload and overcurrent protection are incorporated in the drive.
- The internal brake IGBT permits a correctly selected external braking resistor.
- Fault history and diagnostic codes support supply, motor, temperature, and communication troubleshooting.
- Standalone 2 hp machine-speed control using the integral keypad or configured analog and digital references.
- Multi-drive machine cells where the 4 A drive communicates through the integral RS-485 DSI port.
- Compact equipment requiring controlled deceleration through the internal brake IGBT and a correctly selected external braking resistor.