Features:
- Interface Between the Wide Range AC/DC Power Source and Industrial Control Systems
- Combines Capability of AC/DC Power Conversion with Superior Efficiency and Temperature Performance
- Operates in Conjunction with Industrial Automation Equipment and Control Panels
The 1606-XLE120E operates as a compact 24V, 5A single phase input power supply, providing reliable DC power to industrial automation systems and control devices. It continuously converts incoming AC or DC power (wide range input with Auto-select functionality) to regulated 24 VDC at 5A output current, distributing this power to support steady state operation of PLCs, sensors, actuators, and other industrial components. Superior efficiency is standard with the 1606-XLE120E, and the 20% power reserve capability allows continuous operation at temperatures up to +45°C without compromising performance. The 1606-XLE120E incorporates essential features including extra-low inrush current, active power factor correction, and DC-OK signaling within an ultra-small form factor.
The 1606-XLE120E provides essential power functions common to industrial control applications, and is a critical component of the automation infrastructure, directly affecting the proper, normal operation of the overall control system. One or more 1606-XLE120E power supplies may be utilized per system depending on the power requirements and redundancy needs. The 1606-XLE120E occupies minimal installation space with its ultra-small size, making it ideal for compact control panels and machinery with limited cabinet space.
For high-demand industrial applications, the 1606-XLE120E can be deployed in configurations requiring multiple power supplies to support larger system loads. In addition to standard single supply operation, the 1606-XLE120E's design supports integration into redundant power architectures where automatic switchover capabilities may be implemented through external monitoring systems. The 1606-XLE120E's DC-OK signal enables continuous monitoring of power supply health. If external monitoring systems detect that a primary power supply is no longer providing stable output (outside configured voltage/tolerance levels), appropriate failover actions can be triggered to maintain system operation and log diagnostic events.
The 1606-XLE120E Allen-Bradley Single Phase Input Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen-Bradley 1606-XLE120E Single Phase Input Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1606-XLE120E Single Phase Input Module Specs
General
- Manufacturer Allen-Bradley
- Model 1606-XLE120E
- Condition New Original ready stock
- Product Family 1606-XLE120EC,1606-XLE120EE,1606-XLE120EN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Control Panels: Powering basic machine control panels and OEM systems.
- Component Powering: Supplying 24V DC to sensors, relay coils, pilot lamps, solenoid valves, and sirens.
- PLC Support: Serving as the power source for PLC input modules and communication switches.
- Facility Management: Used in building and facility control systems.
- Industrial Equipment: General use in monitoring, measurement, and instrumentation equipment.
- Temperature Range: Operational from -25°C to +70°C. Full power is available up to +60°C. A 20% power reserve (up to 144W) can be used continuously at temperatures up to +45°C. Derating of 3W/°C is required between +60°C and +70°C.
- Humidity & Protection: Supports 5% to 95% relative humidity (no condensation allowed) and has an IP20 protection rating.
- Hazardous Locations: Suitable for use in Class I Division 2 (Groups A, B, C, D) and ATEX Zone 2 environments.
- Altitude: Designed for altitudes up to 5000m, though derating is required above 2000m.
- Voltage Adjustment: The output voltage is factory-set to 24.1V DC but can be manually adjusted from 24 to 28V DC using a front-mounted potentiometer.
- Input Selection: Features Auto-select input, which automatically detects and adjusts to AC input voltages between 100–120V and 200–240V, eliminating the need for manual jumper switches.
- Status Monitoring: Includes a green "DC-OK" LED and a DC-OK relay contact to provide status feedback to a controller or alarm system.
- Installation: Designed for standard vertical mounting on a DIN rail with input terminals at the bottom and output terminals at the top to ensure proper convection cooling.