Features:
- Wide-Range AC Input to Regulated 24-28V DC Output with Synchronous Rectification
- 150% Short-Term Peak Power and Large Output Capacitors for Motor Starting and Energy Absorption
- Compatibility with Rockwell Automation Control Platforms and Global Industrial Standards
The 1606-XLS240E functions as the primary switched mode power supply within industrial control enclosures, delivering stable 24-28V DC power to all connected automation equipment. It continuously converts incoming AC power through its wide-range input voltage design into precisely regulated 24-28V DC, distributing this power via standard wiring practices to maintain steady-state operation of monitors, controllers, and field devices. Consistent power delivery is inherent to the 1606-XLS240E design, while the integrated output power manager and virtually zero input inrush current streamline commissioning and reduce stress on upstream protective devices.
The 1606-XLS240E furnishes fundamental power functions essential to the entire control architecture, serving as a critical element of the operational infrastructure that directly influences proper, normal system performance. One or multiple 1606-XLS240E units may be deployed per enclosure based on aggregate load calculations and specific application requirements.
For applications demanding elevated power availability, a supplementary 1606-XLS240E may be installed to establish a redundant power architecture utilizing external monitoring and switching components. Beyond standard single-unit operation, such an arrangement can execute automatic load transfer when coordinated with appropriate external control circuitry. Under this methodology, the redundant scheme persistently evaluates the operational status of both 1606-XLS240E units via their respective dry DC-OK contact outputs.
The 1606-XLS240E Allen-Bradley Switched Mode Power Supply may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen-Bradley 1606-XLS240E Switched Mode Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1606-XLS240E Switched Mode Power Supply Specs
General
- Manufacturer Allen-Bradley
- Model 1606-XLS240E
- Condition New Original ready stock
- Product Family 1606-XL480EP,1606-XLE120E
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- High Inrush Loads: Powering electric motors, solenoids, and capacitive loads that demand massive peak startup energy.
- Industrial Automation: Providing ultra-stable 24V DC power to Programmable Logic Controllers (PLCs), Human-Machine Interfaces (HMIs), and I/O blocks.
- Battery Charging Systems: Functioning as a continuous voltage source to safely charge VRLA lead-acid batteries.
- Redundant Control Panels: Integrating seamlessly into critical N+1 or 1+1 backup control layouts via external redundancy modules.
- Mounting Type: Standard DIN-rail mounting inside a protective enclosure.
- Standard Orientation: Input terminals must face the bottom, and output terminals must face the top.
- Ventilation Clearance: Maintain a minimum free space of 40mm above and below the unit, and 5mm on both the left and right sides.
- Input Voltage Flexibility: Supports single-phase AC 100–240V or continuous DC 110–300V wide-range input.
- Power Terminals (AWG): Accepts solid or stranded litz wires ranging from AWG 20 to AWG 10.
- Wire Stripping: Strip power lines exactly 7mm (0.28 inches) before securing them.
- Tightening Torque: Fasten power terminal screws to exactly 1 Nm (9 lb-in).
- Diagnostic Loop: Utilize the active "DC-OK" dry relay contact to integrate real-time status tracking with your PLC.
- Operational Temperature: -25°C to +70°C (-13°F to 158°F).
- Full Power Threshold: Delivers 100% rated capacity up to +60°C (+140°F).
- Thermal Output Derating: Linearly derate output capacity by 6W/°C when operating between +60°C and +70°C.
- Storage Temperature: -40°C to +85°C (-40°F to 185°F) for shipping and prolonged storage.
- Relative Humidity: 5% to 95% r.H. tested under IEC 60068-2-30 standards.
- Condensation Warning: Do not apply incoming electrical power to the system if active condensation or moisture is visible on the chassis.