- Connects X2X Link I/O nodes to POWERLINK as a controlled node
- Provides two shielded RJ45 ports through an integrated 100BASE-TX hub
- Supports fieldbus configuration, firmware update, Dynamic Node Allocation, and synchronized cycles
X20BC0083 is a B&R powerlink bus controller designed for the X20 System.
The controller bridges a remote X20 I/O station to a POWERLINK network while allowing line cabling through its integrated hub and fieldbus-based configuration and firmware update.
Before installation or replacement, verify the complete material number, POWERLINK node addressing, network topology, cable category and segment length, cycle timing, X2X synchronization, X20BB80, X20PS9400 or X20PS9402, X20TB12, and the saved station configuration.
Availability, condition, price, and shipping time for X20BC0083 are confirmed during quotation.
B&R X20BC0083 POWERLINK Bus Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The POWERLINK interface operates as a V1 or V2 controlled node
- Two shielded RJ45 ports support economical line cabling through the integrated hub
- Autonegotiation and Auto-MDI/MDIX are supported on the 100BASE-TX connection
- The X2X Link cycle can run synchronously one-to-one with POWERLINK
- A prescaler can synchronize X2X Link to the POWERLINK timing relationship
- The documented minimum cycle time is 200 microseconds for each bus system
- I/O configuration is transferred through the fieldbus
- Firmware update is supported through the fieldbus connection
- Dynamic Node Allocation supports POWERLINK node commissioning
- Connecting remote X20 X2X Link I/O stations to POWERLINK
- Synchronous distributed I/O operation on POWERLINK machine networks
- Line-topology POWERLINK installations using an integrated two-port hub