Features:
- External probe accessibility: Provides external access to the probe and extension cable for gap adjustment or probe replacement without machine disassembly.
- Corrosion-resistant construction: Uses a glass-reinforced PPS housing with corrosion-resistant stainless-steel components.
- Flexible machinery installation: Provides a 1.5-inch standoff, 5.0-inch probe penetration, 3/4-14 NPT mounting thread, two 3/4-14 NPT fittings, and one plug for externally mounted proximity probe applications.
The 31000-00-00-15-050-02-02 is an English proximity probe housing assembly intended for mounting a proximity probe through a machine case. The 31000/32000 housing family is typically used with radially mounted transducers for vibration or Keyphasor measurements and provides external access for probe adjustment or replacement.
The housing uses conductive glass-reinforced PPS, with corrosion-resistant stainless steel used for the sleeve, retaining chain, outer sleeve, and exterior screws. A Neoprene O-ring seals between the sleeve and the housing.
The 31000/32000 housing family is typically used for radially mounted vibration or Keyphasor transducers. Configuration 31000-00-00-15-050-02-02 is ordered without a probe or probe cable. The housing design complies with API 670 requirements for externally mounted proximity probe housings. It may be used in an intrinsically safe system only with an approved transducer system and appropriate I.S. barriers; the housing itself is not explosion-proof.
OEM lifecycle status for this exact configuration has not been confirmed. Availability from Apter Power is subject to stock and sourcing confirmation.
Bently Nevada 31000-00-00-15-050-02-02 Manuals and Datasheets
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 31000-00-00-15-050-02-02 Proximity Probe Housing Assembly Specs
General
- Manufacturer Bently Nevada
- Model 31000-00-00-15-050-02-02
- Condition Apter stock condition — verify before order
- Product Family 31000 and 32000 Proximity Probe Housing Assemblies
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Environmental Protection: Externally mounted proximity probe installations requiring CSA Type 4X and IP66 environmental protection.
- Intrinsically Safe System Use: May be used with an approved transducer system and appropriate I.S. barriers; the housing itself is not explosion-proof.
- External Probe Access: Allows probe gap adjustment or replacement without machine disassembly, subject to applicable machine shutdown and safety procedures.
- Corrosion-Resistant Construction: Machinery installations requiring a PPS housing and corrosion-resistant stainless-steel hardware.
- No firmware is installed in the housing assembly.
- The housing provides mechanical and environmental protection only.
- Firmware functions, digital diagnostics, configuration software, and signal compensation are not applicable to this product.
- Supplied without a proximity probe or probe cable.
- Supports separately selected probe options specified for the 31000 housing family.
- Available probe options include designated 3300 XL 8 mm, 3300 XL NSv, and 3300 XL 11 mm probes.
- Uses a 3/4-14 NPT mounting thread.
- Includes two 3/4-14 NPT fittings and one plug.
- Intrinsically safe use requires an approved transducer system and appropriate I.S. barriers.
- The housing itself is not explosion-proof.