Features:
- Includes a 0.5 m 3300 XL 8 mm probe with connector protector and multiple approvals
- Uses a 1.5 in standoff adapter and 4.9 in probe penetration
- Type 4X/IP66 PPS housing with 3/4-14 NPT fitting and mounting thread
The assembly is intended for externally mounting a proximity probe through the machine case. It permits probe gap adjustment or replacement without disassembling the machine.
Its option code identifies the installed probe, cable length, standoff, penetration, fitting, and mounting thread. The housing is made from glass-reinforced PPS with corrosion-resistant stainless-steel hardware.
Confirm the complete housing option code and machine-case installation requirements before replacement.
Bently Nevada 31000-30-05-15-049-01-02 Manuals, Datasheets and Product Links
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
Bently Nevada 31000-30-05-15-049-01-02 Proximity Probe Housing Assembly Specs
General
- Manufacturer Baker Hughes / Bently Nevada
- Model 31000-30-05-15-049-01-02
- Condition New
- Product Family 31000 and 32000 Proximity Probe Housing Assemblies, 31000 Series
- 0.5 m 3300 XL 8 mm probe with connector protector and multiple approvals
- 1.5 in standoff adapter
- 4.9 in probe penetration
- One 3/4-14 NPT fitting with two plugs and 3/4-14 NPT mounting thread
- Glass-reinforced polyphenylene sulfide housing
- AISI 304 stainless-steel sleeve and retaining chain
- AISI 303 stainless-steel outer sleeve and exterior screws
- Type 4X and IP66 protection ratings
- Install the outer sleeve into the machine case before inserting the probe sleeve
- Adjust the probe gap before fitting the housing over the outer sleeve
- Tighten the retaining nut to the specified installation requirement
- The housing is not an explosion-proof enclosure