Features:
- 3300 XL 8 mm probe with a 1.0 m cable is installed in the English 31000 housing.
- A 1.5 in standoff and 10.0 in penetration support through-case radial measurements.
- Two 3/4-14 NPT fittings, PPS construction and stainless hardware protect the transducer assembly.
Designed for the current 31000 English housing configuration with the specified probe, cable and mounting hardware.
The assembly provides external access for probe gap adjustment or replacement without dismantling the machine.
Match the penetration, sleeve support, casing attachment and conduit route to the machine installation before fitting the housing.
The 31000-16-10-15-100-02-02 is supplied as an externally mounted Bently Nevada housing configuration.
Verified resources for Bently Nevada 31000-16-10-15-100-02-02:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial vibration measurement through a machine case.
- Keyphasor measurement installations using an externally mounted probe housing.
- Maintenance layouts requiring probe gap adjustment without machine disassembly.
- Accepts the specified 3300 XL 8 mm probe and its 1.0 m extension cable.
- Uses the English 31000 ordering code with 3/4-14 NPT mounting hardware.
- Can be integrated with an approved transducer system and suitable I.S. barriers.
- Install the outer sleeve through the machine case before placing the housing over it.
- Reconnect the probe cable after the retaining nut is tightened and the gap is adjusted.
- Use additional sleeve support when the combined standoff and penetration exceeds 12 inches.
- The PPS housing is certified to NEMA 4X and IP66 mechanical protection ratings.
- 3300 XL 8 mm probe operating and storage range is -51°C to +177°C.
- The housing is not an explosion-proof enclosure and is not designed to resist pressure.