Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports quotations, procurement coordination and system guidance for 31000-28-10-00-175-02-02.

31000-28-10-00-175-02-02

/ 4.9
1001 reviews | Need a Specific Revision?
Bently Nevada 31000-28-10-00-175-02-02 is an English 31000 proximity probe housing assembly with a multiple-approval 3300 XL 8 mm probe, 1.0 m cable, no standoff adapter, 17.5 in penetration and two NPT fittings.
In Stock
Ships by Saturday, October 31
Fast Shipping Available
Get a quick price for 31000-28-10-00-175-02-02
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 31000-28-10-00-175-02-02

  • Manufacturer:
    Bently Nevada
  • Part Number:
    31000-28-10-00-175-02-02
  • Product Family:
    31000 and 32000 Proximity Probe Housing Assemblies
  • Product Type:
    Proximity Probe Housing Assembly
  • Stock:
    1
  • Probe option:
    3300 XL 8 mm probe, multiple approvals
  • Probe cable length:
    1.0 m (39 in)
  • Standoff adapter:
    00 = no standoff adapter
  • Probe penetration:
    175 = 17.5 in nominal
  • Fitting option:
    02 = two 3/4-14 NPT fittings and one plug
  • Mounting thread:
    3/4-14 NPT
  • Housing material:
    Glass-reinforced PPS thermoplastic with conductive fibers
  • Sleeve material:
    AISI 304 stainless steel
  • Outer sleeve and screws:
    AISI 303 stainless steel
  • Mechanical protection:
    NEMA 4X and IP66
  • Operating and storage temperature:
    -51°C to +177°C
  • API compliance:
    API 670 externally mounted proximity probe housing
  • Typical housing weight:
    1.2 kg (2.6 lb)
  • Retaining nut torque:
    29.4 N·m (260 in·lb)
  • Probe penetration adjustment:
    ±0.5 in (13 mm)
  • Long penetration support:
    Additional sleeve support recommended above 12 in
  • Impact strength:
    4 J low/high temperature impact; CSA 7 J ambient impact
  • Pressure capability:
    Mechanical/environmental protection only; not pressure-rated
  • Hazardous-area use:
    Usable with approved transducer system and appropriate I.S. barriers
  • Conduit note:
    Hardline conduit requires the specified NPT fitting
  • Weight:
    2.6 lbs (1.2 kg)
  • Estimated shipping dimensions:
    91.4 × 144.8 × 76.2 mm.
  • Tariff Code:
    Please confirm the destination before shipping.
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Applications Installation & Integration Compliance Compatibility & Interoperability

Features:

  • Multiple-approval 3300 XL 8 mm probe is specified with a 1.0 m cable.
  • The 17.5 in penetration provides the longest reach among these English housing configurations.
  • Two NPT fittings and one plug form the ordered conduit interface.
This long-reach order is intended for deep measurement locations that cannot be served by a short probe sleeve.

The external housing leaves the probe connection available for service and gap work after the machine is closed.

Plan an additional sleeve support near the probe, then confirm the retaining hardware and barrier arrangement before startup.

The 31000-28-10-00-175-02-02 is supplied as a long-reach English two-fitting configuration.
Verified resources for Bently Nevada 31000-28-10-00-175-02-02:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Deeply recessed radial vibration measurement in large industrial machines.
  • Keyphasor sensing where the target is beyond a short sleeve reach.
  • Serviceable machine-monitoring points that need external conduit access.
  • Install the outer sleeve and add support near the probe for the long penetration.
  • Route the 1.0 m cable through the two-fitted English housing before closing the cover.
  • Set the probe gap after the sleeve is seated and before reconnecting the monitoring channel.
  • The housing meets API 670 requirements for externally mounted proximity probe housings.
  • Multiple-approval probe option 28 must be matched to the applicable site approvals.
  • The enclosure is not an explosion-proof housing or a pressure boundary.
  • The ordered probe is part of the 3300 XL 8 mm transducer family.
  • The 3/4-14 NPT mounting thread matches the English 31000 sleeve arrangement.
  • Use an approved transducer system and appropriate I.S. barriers for hazardous-area service.
Description
Bently Nevada 31000-28-10-00-175-02-02 is the longest-reach configuration in this group, using a 17.5 in penetration to place a multiple-approval 3300 XL 8 mm probe inside the machine. A 1.0 m cable exits through the English housing while the two-fitted arrangement accommodates the specified conduit layout.

The PPS enclosure and corrosion-resistant stainless components create a protected service point for vibration or Keyphasor transducer work. The external arrangement is intended to preserve access for adjustment and replacement even when the machine casing remains closed.

Long penetration requires careful mechanical planning: review sleeve resonance, support location, casing geometry and probe gap adjustment before installation. Confirm the monitoring system, barrier selection and environmental limits because this assembly supplies protection rather than an explosion-proof pressure boundary.
Alternative Names
31000-28-10-00-175-02-02 310002810001750202 31000 17.5 inch housing Bently Nevada 31000 long reach 3300 XL 8 mm 17.5 inch housing 31000 dual NPT long penetration 31000 multiple approval long housing 31000 English long-reach assembly
Technical notes
For Bently Nevada 31000-28-10-00-175-02-02, confirm the 17.5 in penetration and provide the additional sleeve support required for a combined dimension above 12 in; verify fittings and approved barriers before commissioning.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is the penetration length for Bently Nevada 31000-28-10-00-175-02-02?
The D option 175 selects a nominal 17.5 in probe penetration.
Which probe approval is associated with Bently Nevada 31000-28-10-00-175-02-02?
Option 28 identifies a multiple-approval 3300 XL 8 mm probe.
Does Bently Nevada 31000-28-10-00-175-02-02 use a standoff adapter?
No. The C option is 00, so the probe is installed without a standoff adapter.
Why is extra sleeve support important for Bently Nevada 31000-28-10-00-175-02-02?
The combined standoff and penetration exceed 12 inches, so the datasheet recommends support near the probe.
What conduit hardware is specified for Bently Nevada 31000-28-10-00-175-02-02?
Its E option 02 contains two 3/4-14 NPT fittings and one plug.
What information should accompany a Bently Nevada 31000-28-10-00-175-02-02 request?
Provide the machine casing details, target location, sleeve support plan and required site approvals.

Product Browsing History