330710-000-050-10-02-00

Features:

• Interface Between the Proximity Measurement System and Critical Rotating Machinery
• Combines Capability of Non-Contact Vibration Sensing with Robust Mechanical Protection
• Operates in Conjunction with the 3300 XL 11 mm Extension Cable and Proximitor Sensor

The 330710-000-050-10-02-00 operates as the 3300 XL 11 mm Proximity Probe in a complete transducer system, providing reliable displacement measurements for all critical rotating equipment monitoring applications. It continuously converts mechanical vibration and position information into electrical signals (3.94 V/mm or 100 mV/mil output) through non-contacting eddy current technology and transmits this data through the system cable to support steady state operation of all vibration monitors and protection systems. Seamless signal integrity is standard with the 330710-000-050-10-02-00, however using the complete 3300 XL 11 mm Proximity Transducer System will allow seamless integration with monitoring equipment in the event of demanding industrial measurement requirements. The 330710-000-050-10-02-00 has made improvements in several areas over previous proximity probe designs in addition to incorporating advanced connector and cable attachment capabilities within the 3300 XL product line.

The 330710-000-050-10-02-00 provides essential sensing functions common to the entire transducer system, and is a critical component of the measurement path, directly affecting the proper, normal operation of the overall machinery protection system. One 330710-000-050-10-02-00 probe is required per measurement point depending on the desired monitoring configuration. The 330710-000-050-10-02-00 features an M16 x 1.5 thread with armor protection, an unthreaded length of 0 mm, an overall case length of 50 mm, and a total length of 1.0 meter (3.3 feet) with Miniature coaxial ClickLoc connector and standard cable construction.

For extended linear range measurement applications, the 3300 XL 11 mm system requires the 330710-000-050-10-02-00 proximity probe installed at the measurement location. In addition to standard vibration monitoring operation, the 330710-000-050-10-02-00 configuration also performs axial position and differential expansion measurements. The 3300 XL 11 mm system executes precise displacement sensing using the internal circuitry specified in the transducer system options. Using this method, the 330710-000-050-10-02-00 continually monitors the gap between probe tip and target surface. If the system detects that the measurement is within the linear range (utilizing the large 11 mm tip for extended range compared to 8 mm systems), it will automatically provide accurate position data to the monitoring system and support critical machinery protection decisions.