Features:
- 1.6-inch overall case length with a 0.5-meter total probe length
- Patented TipLoc molding and CableLoc cable attachment design
- Agency approval option 00: Not required
The Bently Nevada 330101-00-16-05-02-00 is a 3300 XL 8 mm proximity probe with 3/8-24 UNF threads and no armor. Its configuration includes a 0.0-inch unthreaded length, 1.6-inch overall case length, 0.5-meter total probe length and a miniature coaxial ClickLoc connector with standard cable.
The probe uses Bently Nevada’s TipLoc molding method and CableLoc design, with a rated probe-case-to-lead tensile strength of 330 N (75 lbf). The ClickLoc connector is corrosion-resistant and gold-plated and is tightened finger-tight when connected to another 3300 XL ClickLoc connector.
The final 00 code identifies the “agency approval not required” option. System compatibility and performance depend on the selected extension cable and matching 3300 XL Proximitor Sensor total system length.
No official End-of-Life notice for Bently Nevada 330101-00-16-05-02-00 has been confirmed. Availability from Apter Power is subject to current stock and configuration verification.
Bently Nevada 330101-00-16-05-02-00 8 mm Proximity Probe Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-00-16-05-02-00 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330101-00-16-05-02-00
- Condition New — subject to Apter inventory verification.
- Product Family 3300 XL 8 mm Proximity Transducer System
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial vibration measurement
- Axial or thrust position measurement
- Keyphasor phase-reference measurement
- Speed measurement, subject to the official application guidance
- Standard probe operating and storage temperature: −52°C to +177°C (−62°F to +350°F).
- Probe tip material: polyphenylene sulfide (PPS).
- Probe case material: AISI 303 or 304 stainless steel.
- Standard probe cable: 75 Ω triaxial FEP-insulated cable.
- Minimum cable bend radius: 25.4 mm (1.0 in).
- Exposure below −34°C (−30°F) may cause premature pressure-seal failure.
- Radial vibration measurement.
- Axial or thrust position measurement.
- Keyphasor phase-reference measurement.
- Speed measurement, subject to Bently Nevada application guidance.
- Static position and dynamic vibration measurement when used as part of a complete 3300 XL 8 mm system.
- System output voltage is proportional to the distance between the probe tip and the observed conductive surface.