Features:
- Serves as the Sensing Element in the 3300 XL 8 mm Proximity Transducer System
- Integrates 8 mm Diameter Probe Tip with M10×1 Threaded Mounting and 5.0 Meter Cable
- Functions in Conjunction with 3300 XL Extension Cables and Proximitor Sensors
The 330103-00-05-50-02-00 operates as the 3300 XL 8 mm Proximity Probe in a 3300 XL transducer system, providing accurate eddy current displacement measurement for rotating machinery vibration and position monitoring. It continuously detects changes in the gap between the probe tip and the observed conductive target surface, converting this physical displacement into a modulated electrical signal that is transmitted through the integral 5.0 meter cable to the 3300 XL Proximitor Sensor for signal conditioning. Reliable signal integrity is standard with the 330103-00-05-50-02-00, however using the optional armored cable configuration will allow enhanced mechanical protection in harsh industrial environments. The 3300 XL series has made improvements in several areas over previous proximity probe designs in addition to incorporating fully interchangeable components without individual matching or bench calibration.
The 330103-00-05-50-02-00 provides essential sensing functions common to the entire transducer system, and is a critical component of the measurement path, directly affecting the accuracy and stability of the overall vibration and position monitoring system. One 330103-00-05-50-02-00 probe is required per measurement point, paired with one 3300 XL extension cable and one 3300 XL Proximitor Sensor to form a complete transducer system. The 330103-00-05-50-02-00 occupies only a small mounting footprint on the machine case and is always positioned with the probe tip facing the observed conductive surface at the specified target gap.
For dual redundant measurement applications, the monitoring system requires a second independent 330103-00-05-50-02-00 probe installed at the redundant measurement location. In addition to standard single probe operation, the redundant configuration also performs independent gap measurement. The dual transducer configuration executes measurement verification using separate signal paths specified in the system configuration. Using this method, the redundant measurement system continually monitors the health of both probes. If the system detects that the primary 330103-00-05-50-02-00 probe is no longer providing stable output (outside configured linear range or tolerance levels), it will automatically transfer the monitoring function to the secondary probe and place an event in the System Event List.
The 330103-00-05-50-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-00-05-50-02-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330103-00-05-50-02-00 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330103-00-05-50-02-00
- Condition New Original ready stock
- Product Family 330103-00-05-50-02-05,330103-00-05-50-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Vibration & Position: Measures both dynamic radial vibration and static axial position (thrust).
- Speed & Keyphasor: Used for rotational speed measurement and as a Keyphasor reference for phase information.
- Machinery Types: Common in steam and gas turbines, centrifugal compressors, motors, and generators.
- Temperature Range: Operates from -51°C to +177°C (-60°F to +351°F). Short-term exposure (less than 24 hours) up to +250°C (+482°F) is supported.
- Pressure Seal: Designed to seal differential pressure between the tip and case using a Viton O-ring.
- Relative Humidity: Rated for 100% condensing, provided connectors are properly protected.
- Chemical Resistance: The probe tip is made of Polyphenylene sulfide (PPS) for durability against industrial oils and chemicals.
- API 670 Standard: Fully complies with the American Petroleum Institute’s 4th edition requirements for linear range, accuracy, and temperature stability.
- RFI/EMI: Meets European CE mark approvals for electromagnetic immunity.
- Hazardous Area Approvals: When paired with appropriate intrinsically safe barriers, the system is certified for use in: North America: CSA/NRTL/C (Class I, Div 1; Groups A-D). International: ATEX and IECEx (Ex ia IIC and Ex nA IIC).