Features:
- M10 x 1 metric thread with 5 mm unthreaded length and 13 mm overall case provides a compact profile for shallow metric mounting ports.
- Optional FluidLoc cable and connector protectors available for fluid containment and environmental sealing in lubricated or humid applications.
- 8 mm PPS tip construction with thicker coil encapsulation delivers superior impact resistance over smaller 5 mm probes.
The 330103-05-13-10-02-00 fits tight spots. Its 13 mm case and 5 mm unthreaded section slide into shallow metric ports where longer probes won't go. The M10 x 1 thread matches standard metric mounts—no adapters needed.
Order it with FluidLoc cable and the probe stops oil from wicking through the cable interior. Add connector protectors for humid environments or conduit runs. These options turn a basic probe into a sealed, fluid-blocking solution.
Don't let the compact size fool you. The 8 mm construction gives this probe thicker PPS plastic around the coil than any 5 mm alternative. It takes hits that would crack smaller probes, keeping your measurements accurate in rough service.
The 330103-05-13-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-05-13-10-02-00 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330103-05-13-10-02-00 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330103-05-13-10-02-00
- Condition New Original ready stock
- Product Family
330103-05-13-10-01-00,330103-05-13-10-11-00,330103-05-13-10-02-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Radial Vibration Monitoring: Measures real-time vibration of shafts in rotating machinery (such as steam turbines, compressors, pumps, and generators).
- Axial Displacement Measurement: Monitors wear of thrust bearings or axial movement of shafts.
- Speed and Key Phase Measurement: Provides speed and timing reference signals via keyways or protrusions on the sensing shaft.
- Probe itself: Passive/analog sensor, no firmware available.
- Compatible System: If used with a Bently Nevada 3500 monitoring system (such as the 3500/42M displacement monitor), firmware updates occur on the 3500 series monitoring module, not the probe.
- System Pairing: The probe must be connected to the correct Proximitor sensor (preamplifier) and extension cable. The 3300 XL system is highly interchangeable, and individual probe calibration is typically unnecessary.
- Gapping: The physical distance between the probe and the metal surface being measured must be adjusted during installation.