Features:
- 3/8-24 UNF thread with 3.0-inch overall case length provides standard English mounting with balanced reach for typical machine casings.
- Increased chemical resistance compared to 3300 RAM probes enables reliable operation in process compressor applications with exposure to aggressive media.
- Superior side-view characteristics versus 3000-series 190 probes allow accurate measurements in confined spaces where optimal probe orientation is limited.
The 330908-00-30-10-01-05 is designed for installations where a balanced reach is needed—neither too short to miss the target nor so long that it interferes with adjacent components. Its 3.0-inch overall case length provides adequate reach for standard machine casings while maintaining a compact profile that fits in most mounting ports.
The 330908-00-30-10-01-05 offers significantly increased chemical resistance compared to previous 3300 RAM probe designs, making it ideally suited for process compressor applications where exposure to aggressive media is a daily reality. In environments such as natural gas compression, chemical processing, and refinery operations, probes are routinely exposed to sour gas, corrosive vapors, and lubricating oils that can degrade standard materials over time.
The 330908-00-30-10-01-05 delivers superior side-view characteristics compared to the 3000-series 190 probe when gapping at the same distance from the probe target—a critical advantage in applications where space constraints limit optimal probe orientation. In tightly packed machinery such as centrifugal compressors, steam turbines, and gearboxes, achieving perfect perpendicular alignment between probe and target is often physically impossible.
The 330908-00-30-10-01-05 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330908-00-30-10-01-05 3300 NSv Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330908-00-30-10-01-05 3300 NSv Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330908-00-30-10-01-05
- Condition New Original ready stock
- Product Family 330908-00-30-10-02-05,330908-00-30-10-12-05,330908-00-30-10-01-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Small Rotating Machinery: Such as small centrifugal compressors, high-speed gearboxes, hollow shaft motors, or small pumps.
- Narrow Space Monitoring: When radial space is limited at the installation location, or the counterbore is very small, the NSV probe can reduce interference from side-viewing effects.
- Precision Bearing Monitoring: Used to measure shaft vibration and displacement in hydrostatic or hydrodynamic bearings.
- Preamplifier: Must be connected to the 3300 XL NSV Proximitor (330980), otherwise linearity will be significantly reduced.
- Signal Transmission: The high-frequency electromagnetic field signal is transmitted to the preamplifier via coaxial cable. The preamplifier then converts it into a -200 mV/mil (7.87 V/mm) voltage signal, which can be connected to the 3500 monitoring system or portable diagnostic instrument.
- Intrinsic Safety: When used with safety barriers, meets ATEX/IECEx Zone 0/1 intrinsic safety requirements.
- Mechanical Safety (API 670): Designed to meet API 670 standards, ensuring mechanical strength, electrical isolation, and signal repeatability in industrial environments.
- Environmental Compliance: Complies with the RoHS Directive, restricting the use of hazardous substances. Its FEP cable sheath has good chemical stability, preventing monitoring failure due to cable damage.