Features:
- 4.0 mV/mm/s nominal velocity sensitivity
- 4.5 Hz to 5 kHz published frequency response
- 1/2-20 UNF mounting thread with CSA/US/C option
Within the 330500 Velomitor family, the 330500-01-01 code combines the 01 mounting selection with the 01 approval option.
Integrated signal conditioning provides a velocity-proportional output for absolute vibration measurements on machine housings, bearing cases, and structural surfaces.
Mounting preparation should include thread confirmation, a clean contact surface, cable and connector checks, monitor-input matching, and verification of the required approval option.
Apter Power can quote the Bently Nevada 330500-01-01 Velomitor Piezo-velocity Sensor and assist with mounting and monitor-input matching.
Bently Nevada 330500-01-01 Velomitor Piezo-velocity Sensor Manuals, Datasheets, Links
Bently Nevada 330500-01-01 Velomitor Piezo-velocity Sensor Specs
General
- Manufacturer Bently Nevada
- Model 330500-01-01
- Condition New and Original
- Product Family 330500 Velomitor Piezo-velocity Sensor
- Sensitivity: Nominal sensitivity is 4.0 mV/mm/s, equivalent to 100 mV/in/s.
- Frequency: The published response extends from 4.5 Hz to 5 kHz.
- Velocity: The sensor measures up to 1270 mm/s peak within specified limits.
- Linearity: Amplitude linearity is within +/-2% of the best-fit straight line.
- Thread: The 01 mounting option provides a 1/2-20 UNF thread.
- Housing: The case is manufactured from 316L stainless steel.
- Connector: The electrical connection is a 2-pin Mil-C-5015 receptacle.
- Size: Typical dimensions are 25.3 mm diameter by 63.2 mm height.
- Surface: Use a flat, properly prepared mounting surface.
- Tightness: Secure the sensor according to the documented thread practice.
- Cable: Protect the connector and cable from strain and interference.
- Monitor: Confirm bias voltage and monitor input requirements before startup.