Features:
- Fixed length: 64 ft (19.5 m) CB2W100 ordering option.
- Splash-proof sensor end: overmolded boot on shielded 22 AWG cable.
- Field termination: blunt-cut conductors at the monitor end.
Bently Nevada CB2W100-064 provides the 64 ft cable length for a compatible sensor-to-monitor installation.
The shielded conductor and overmolded boot support splash-proof sensor-end connection across the documented temperature range.
Route planning must confirm the connected sensor, monitor termination, cable exposure, and available path before this fixed length is ordered.
Availability of Bently Nevada CB2W100-064 is subject to Apter Power inventory and sourcing confirmation.
Verified Apter-hosted resources for Bently Nevada CB2W100-064:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada CB2W100-064 Splash-Proof Interconnect Cable Specs
General
- ManufacturerBently Nevada
- ModelCB2W100-064
- ConditionNew Original ready stock
- Product Family330505 Low Frequency Velocity Sensor Accessories
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Documented build
- Conductors: shielded 0.382 mm² (22 AWG) cable.
- Sensor end: splash-proof overmolded boot for the compatible transducer interface.
- Monitor end: blunt cut for termination according to the installed system wiring.
- Temperature range: -50 to 200 °C (-58 to 392 °F).
64 ft installation review
- Path length: confirm 64 ft reaches the monitor through the planned cable route.
- Exposure: evaluate temperature and splash conditions along the complete run.
- Support: protect the cable from abrasion, pull force, and sharp routing changes.
- Termination access: reserve working length at the blunt-cut monitor end for the specified wiring method.
Compatibility boundary
- Connected device: identify the exact Bently Nevada sensor before ordering the cable.
- Excluded pairing: the manufacturer does not recommend CB2W100 splash-proof cable for the 200350 accelerometer.
- Monitor wiring: match the blunt-cut conductors and shield treatment to the system documentation.
- Replacement record: retain both sensor and cable part numbers with the installed asset history.