Features:
- Long cable option: 125 ft (38.1 m) CB2W100 ordering length.
- Protected sensor end: splash-proof overmolded boot on shielded 22 AWG cable.
- Flexible field wiring: blunt-cut monitor end for the documented system termination.
Bently Nevada CB2W100-125 is intended for compatible installations where the measured cable route requires the 125 ft factory option.
The construction combines a splash-proof sensor interface with shielded conductors and a monitor end prepared for field wiring.
Because of the longer run, the route should be reviewed for support, temperature exposure, termination access, and sensor compatibility before purchase.
Availability of Bently Nevada CB2W100-125 is subject to Apter Power inventory and sourcing confirmation.
Verified Apter-hosted resources for Bently Nevada CB2W100-125:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada CB2W100-125 Splash-Proof Interconnect Cable Specs
General
- ManufacturerBently Nevada
- ModelCB2W100-125
- ConditionNew Original ready stock
- Product Family330505 Low Frequency Velocity Sensor Accessories
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
125 ft route controls
- Measured path: confirm the fixed 38.1 m length against the actual sensor-to-monitor route.
- Cable support: prevent long unsupported spans, abrasion, and pull force at the boot.
- Thermal survey: evaluate every exposed section against the -50 to 200 °C range.
- Service access: preserve workable routing and termination space without tight excess coils.
Connection preparation
- Sensor interface: inspect the splash-proof overmolded boot before mating.
- Monitor end: terminate the blunt-cut conductors only to the applicable wiring diagram.
- Shield treatment: follow the connected monitoring-system grounding instructions.
- Commissioning check: verify continuity, secure support, and freedom from connector strain.
Sensor selection review
- Exact sensor: identify the connected Bently Nevada transducer and its cable requirement.
- 200350 warning: CB2W100 splash-proof cable is not recommended for the 200350 accelerometer.
- Length comparison: use the 125 ft option only when the shorter CB2W100 lengths do not fit the documented route.
- Project record: retain sensor, cable, monitor, and termination details together.