Features:
- Four-metre extension: The 040 option contributes 4.00 m to a 7200 proximity-transducer loop.
- Unarmored cable: The 00 option omits stainless-steel lead armor.
- Five-metre arrangement: A 1.00 m integral probe lead and this extension are specified with the 18745-03 Proximitor.
The extension cable carries the probe signal along the planned 7200 transducer path rather than generating a measurement independently.
The 7200 ordering table distinguishes the unarmored 00 construction from the separately offered armored 01 option.
Cable and probe share an operating-temperature range of -34 to +177 °C, while the Proximitor has a separate limit.
Apter Power can provide technical documentation, a quotation and system-matching support for the Bently Nevada 21747-040-00 Proximity Transducer Extension Cable.
Bently Nevada 21747-040-00 Proximity Transducer Extension Cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Length option: The 040 code sets a 4.00 m extension-cable length.
- Armor option: The 00 code supplies the cable without stainless-steel armor.
- Length tolerance: Extension-cable physical and electrical lengths agree within ±10%.
- Armored alternative: The 01 option is the separate protected cable choice in the 21747 ordering table.
- Probe lead: A 1.00 m integral lead combines with this 4.00 m extension.
- Total path: Those two lengths produce the specified 5 m probe-to-Proximitor arrangement.
- Proximitor: The 18745-03 is the published unit for the 5 m combined length.
- System role: The Proximitor conditions the probe signal before it reaches the monitor.
- Cable temperature: The 7200 probe and extension cable range is -34 to +177 °C.
- Separate electronics limit: The 7200 Proximitor range is -51 to +100 °C.
- Humidity: The 7200 system environmental limit is up to 95% noncondensing relative humidity.
- Radial vibration: A complete 7200 loop can monitor shaft vibration in rotating machinery.
- Axial position: The assembled transducer system supports thrust-position measurement.
- Shaft position: The full 7200 system can indicate average radial shaft position.
- Eccentricity: The complete measurement loop can measure rotor bow.