Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power delivers genuine Bently Nevada cabling hardware, providing dependable, rugged connectivity solutions to maintain the absolute integrity of your machinery protection systems.

84510-70

/ 4.9
1001 reviews | Need a Specific Revision?
The Bently Nevada 84510-70 armored cable provides a reliable connection using a 2-wire shielded 22 AWG armored cable with a 2-socket female connector and terminal lugs.
In Stock
Ships by Thursday, October 29
Fast Shipping Available
Get a quick price for 84510-70
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 84510-70

  • Manufacturer:
    Bently Nevada
  • Part Number:
    84510-70
  • Product Family:
    9200 and 74712 Seismoprobe Velocity Transducers
  • Product Type:
    Armored Cable
  • Stock:
    3
  • Cable Type:
    2-wire shielded armored cable
  • Wire Size:
    22 AWG (0.5 mm²)
  • Connector:
    2-socket female connector
  • Termination:
    Terminal lugs
  • Cable Length:
    70 ft
  • Minimum Length:
    3.0 ft (0.9 m)
  • Maximum Length:
    70 ft (21 m)
  • Weight:
    3.2 kg
  • Estimated shipping dimensions:
    32x32x12cm
  • Tariff Code:
    9010600000
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Operation Compliance Application Scenarios

Features:

  • Provides enhanced mechanical protection for cable routing in industrial environments.
  • The 2-wire shielded design helps maintain dependable signal quality during operation.
  • Combines a 2-socket female connector with terminal lugs to simplify equipment connection and installation.
The Bently Nevada 84510-70 is built for industrial monitoring systems that require dependable cable protection and stable electrical connections. Its armored structure is well suited for installations where cables may be exposed to physical wear, while the shielded construction supports consistent signal transmission. These characteristics make it a practical choice for demanding industrial environments.

Using 22 AWG (0.5 mm²) conductors, the cable provides an effective balance of flexibility and durability. One end is fitted with a 2-socket female connector for equipment connection, and the opposite end uses terminal lugs to support convenient field wiring. This configuration helps streamline installation without adding unnecessary complexity.

With a supplied cable length of 70 ft (21 m), the Bently Nevada 84510-70 is suitable for applications requiring extended cable routing between equipment. The cable family also includes versions from 3.0 ft (0.9 m) to 70 ft (21 m), giving users flexibility when selecting the appropriate length for different installation layouts.

The 84510-70 Bently Nevada Armored Cable may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 84510-70 Armored Cable Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 84510-70 Armored Cable Specs

General

  • Manufacturer Bently Nevada
  • Model 84510-70
  • Condition New Original ready stock
  • Product Family 84510-50,84510-33
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Signal transmission: Uses dual-core 22AWG high-purity copper wire for stable transmission of high-frequency vibration and displacement differential signals.
  • Armor protection: Externally wrapped with a stainless steel metal armor layer to prevent mechanical lateral compression and abrasion from hard debris.
  • Connector airtightness: The probe end plug has a built-in moisture-proof and corrosion-resistant fluororubber sealing ring to prevent oil and chemical liquids from seeping in.
  • Long-distance extension: With a total physical length of up to 70 feet, it meets the remote relay wiring requirements of large rotating units.
  • Intrinsically Safe and Explosion-proof: The electrical characteristics of the cable fully comply with the technical specifications of ATEX and IECEx intrinsically safe explosion-proof systems.
  • Protection Level: The overall encapsulation and connector protection performance perfectly achieves the industrial water and vapor resistance standard of IP65 or higher.
  • Environmental Compliance: The sheath and conductor materials have fully passed RoHS environmental testing and are free of any restricted heavy metals such as lead and mercury.
  • System Verification: Impedance and capacitance distribution parameters are strictly aligned with the specifications of Bently's original 3300 and 3500 monitoring modules.
  • Turbine Generators: Equipped with Seismoprobe speed sensors to monitor the lateral vibration of the main shaft bearings of high-voltage turbines in power plants.
  • Cracking Compressors: Used for unobstructed, open-air wiring of core ethylene compressor units in refineries without conduit protection.
  • Industrial Blowers: Rigid cabling deployed on the side of the bearing housing of large centrifugal high-strength induced draft fans in cement plants or steel plants.
  • Harsh Mining Areas: Used for monitoring high-intensity friction and impact in large open-pit mines, such as on crushers or vibrating screens for mineral processing.
Description
The Bently Nevada 84510-70 is a 2-wire shielded 22 AWG (0.5 mm²) armored cable intended for industrial wiring applications where dependable signal transmission and mechanical protection are required. One end is fitted with a 2-socket female connector, while the opposite end uses terminal lugs for convenient field termination.

Its armored construction helps protect the cable in demanding industrial environments, while the shielded design supports stable signal integrity. The 22 AWG (0.5 mm²) conductor size provides a practical balance between flexibility and durability for installation in monitoring and control systems.

Bently Nevada 84510-70 is supplied with a cable length of 70 ft (21 m), which is also the maximum supported length for this cable configuration. The product series is available with lengths ranging from a minimum of 3.0 ft (0.9 m) up to a maximum of 70 ft (21 m), allowing users to select the appropriate cable length for different installation requirements.
Alternative Names
8451O-7O 845I0-70 8451070 84510-50 84510-33 84510-10 84510-12 84510-17
Technical notes
The Bently Nevada 84510-70 is a heavy-duty armored interconnect cable designed to extend signal paths between Seismoprobe transducers and monitors. It features a continuous stainless steel armor wrap spanning exactly 70 feet (21 meters) to safeguard critical 22 AWG twisted-pair conductors against harsh factory floor crushing.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
How does Bently Nevada 84510-70 connect to field equipment?
One end is equipped with a 2-socket female connector, while the opposite end is terminated with terminal lugs for field wiring.
Can Bently Nevada 84510-70 be used for long cable runs?
Yes. Bently Nevada 84510-70 has a cable length of 70 ft (21 m), which is the maximum available length for this cable configuration.
Which conductor size is provided by Bently Nevada 84510-70?
The cable uses 22 AWG (0.5 mm²) conductors.
Does Bently Nevada 84510-70 support different cable lengths?
Yes. The cable series is available with lengths from 3.0 ft (0.9 m) to 70 ft (21 m), while this model is supplied in the 70 ft version.

Product Browsing History