Features:
- Two-Wire Transmitter: Loop-powered operation with a 4–20 mA output proportional to vibration amplitude.
- Configured Range: Ordering option 04 specifies a 0–4 mils p-p (0–100 µm p-p) full-scale range.
- Matched Sensor System: Designed for use with a 3300 NSv proximity probe and matching extension cable; option 02 specifies bulkhead screw mounting.
The Bently Nevada
990-04-XX-02-05 MOD: 167577-05 is a vibration transmitter intended primarily for OEM centrifugal air compressors, small pumps, motors, and fans. It integrates the Proximitor sensor function and provides a proportional vibration signal for a machinery control system.
In the ordering code, 04 identifies the full-scale range, XX identifies a modified system-length option, and 02 identifies bulkhead screw mounting. The exact probe and extension-cable length must be confirmed from documentation for MOD 167577-05.
Current OEM lifecycle classification is not stated in the available Bently Nevada documentation. Availability is confirmed during quotation.
Bently Nevada 990-04-XX-02-05 MOD: 167577-05 Vibration Transmitter Manuals,Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 990-04-XX-02-05 MOD: 167577-05 Vibration Transmitter Specs
General
- Manufacturer Bently Nevada
- Model 990-04-XX-02-05 MOD: 167577-05
- Condition New Original ready stock
- Product Family 990 Vibration Transmitter, 3300 NSv Proximity Transducer System
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Signal Output: The transmitter provides a 4–20 mA output proportional to vibration amplitude.
- Not OK Response: The output falls below 3.6 mA within 100 microseconds after a Not OK condition is detected.
- Loop Supply: The specified input range is +12 to +35 VDC at the transmitter terminal.
- Range Code 04: 0–4 mils p-p (0–100 µm p-p) full scale.
- Length Code XX: Modified system-length option; confirm the exact length from MOD 167577-05 documentation.
- Mounting Code 02: Bulkhead screws.
- Approval Code 05: CSA Division 2, ATEX Zone 0 and Zone 2, and ABS maritime approval.
- Probe Type: Use a 3300 NSv proximity probe specified for the 990 transmitter system.
- Extension Cable: Match the extension cable to the modified system-length requirement documented for MOD 167577-05.
- Replacement Check: Compare the complete ordering code and MOD number before replacing another 990 transmitter configuration.