Features:
- Accepts thermocouple and low-level millivolt signals for temperature measurement.
- Uses C1 terminal-block keying to match the supported S-series wiring assembly.
- Integrates with DeltaV S-series carriers and configured temperature sensor types.
KJ3224X1-BK1 combines input type of Thermocouple and millivolt, terminal key of C1, and card series of DeltaV S-series in the DeltaV S-Series Traditional I/O platform.
It acquires thermocouple and millivolt field signals through the DeltaV S-series I/O subsystem. This role connects the S-Series Thermocouple and mV Input Card to the surrounding DeltaV S-Series Traditional I/O architecture.
Before commissioning, set the matched terminal block to key position C1; remove field and system power before handling; and confirm thermocouple type, polarity, and wiring.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ3224X1-BK1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Measures thermocouple temperature signals through the supported DeltaV process-control I/O architecture.
- Acquires low-level millivolt signals from compatible industrial sensors and measurement devices.
- Supports hazardous-area S-series I/O service when every stated installation condition is met.
- Draws 210 mA from the 12 VDC local bus as the module's required system-side power load.
- No field calibration is needed during normal installation, operation, or routine module service.
- Contains no user-serviceable components and must remain assembled during maintenance or replacement.
- Supports ambient operation throughout the specified range from -40 to +70 degrees C.
- Operates at 5 to 95% relative humidity when condensation is prevented in the installed environment.
- Tolerates airborne-contaminant exposure within the limits of ISA-S71.04 Class G3 service.
- Set the matching terminal block to rotary-key position C1 before installing the input card.
- Remove field power and system power before inserting, removing, or servicing the card.
- Verify the selected thermocouple type, lead polarity, and field wiring before commissioning each channel.