Features:
- Provides eight independently managed 4-20 mA analog-output channels for compatible field loops.
- Maintains bidirectional HART data on supported channels for instrument information and maintenance access.
- Includes a termination block with loop-disconnect facilities for organized commissioning and service work.
The VE4013S2B1 ordering reference belongs to the DeltaV M-series Intrinsically Safe I/O family and identifies the DeltaV M-series IS 8-Channel Analog Output Assembly.
Intrinsically safe 4-20 mA control loops for valve positioners and other analog final elements.
VE4013S2B1 is an eight-channel IS AO assembly with HART and loop disconnect. It must remain in the M-series controller and carrier architecture.
Availability of VE4013S2B1 is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE4013S2B1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Intrinsically safe 4-20 mA control loops for valve positioners and other analog final elements.
- M-series DeltaV installations that require HART communication on eight output channels.
- Maintenance circuits needing individual loop isolation at the termination block.
- Use HART device information to support field-loop diagnostics where the connected instrument permits it.
- Isolate an individual output through the loop-disconnect terminal before field maintenance.
- Investigate channel, wiring, and field-device conditions before replacing the I/O hardware.
- Apply the certified entity-parameter assessment to each intrinsically safe loop.
- Separate IS wiring and installation practices from non-IS circuits as required by the design.
- Follow the exact approval documentation associated with the product label and installation region.
- Install only in the supported DeltaV M-series controller and carrier architecture.
- Terminate eight 4-20 mA HART output loops on the included S2B1 block.
- Confirm polarity, shielding, channel assignment, and loop-disconnect position before startup.