Features:
- Right-side start position: Identified by Emerson as the VerticalPlus start extender on the right side.
- Defined LocalBus capacity: Rated for 12.6 VDC at 15 A on the LocalBus path.
- Wide environmental range: Specified for -40°C to +70°C and non-condensing humidity.
KJ4003X1-BE1 provides the right-hand starting point for a VerticalPlus carrier extension, making the extender direction part of the ordering decision.
The component belongs in a route whose complete combination of I/O carriers and LocalBus Extenders remains within the Emerson length limit.
Its environmental and service limits support controlled cabinet planning without implying that the left-side KJ4003X1-BF1 is interchangeable.
For Emerson KJ4003X1-BE1 VerticalPlus I/O Carrier Extender Right sourcing, Apter Power can help confirm documentation, position and quotation details.
Emerson KJ4003X1-BE1 VerticalPlus I/O Carrier Extender Right Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Route orientation: KJ4003X1-BE1 starts the right side of the VerticalPlus extension, so the side designation controls placement.
- Total-path limit: Apply the 6.5 m maximum to the complete carrier-and-extender combination, not to one cable segment in isolation.
- Enclosure crossing: Route extender cable in conduit between enclosures and include that path in the layout before installation.
- LocalBus scope: Use the 12.6 VDC, 15 A marking for this LocalBus path rather than as a blanket cabinet rating.
- Ambient decision: Select the extender only where the enclosure keeps the component within its -40°C to +70°C operating range.
- Condensation boundary: The 5%–95% humidity range is non-condensing, so moisture control remains an enclosure requirement.
- Mechanical fit: Qualify the installed carrier position against the published shock and 2–150 Hz vibration profile.
- Contaminant scope: ISA G3 is the documented airborne-contaminant boundary; harsher exposure needs additional protection or a different installation.
- Power isolation: The extender cannot be removed or inserted while system power is energized.
- Cable handling: De-energize system power before disconnecting carriers or LocalBus Extender cables.
- Internal repair: The unit contains no user-serviceable parts and must not be disassembled.
- Calibration: Periodic calibration is not required.
- VerticalPlus carrier extensions: Starts the right side of an extended I/O-carrier arrangement.
- Distributed cabinet layouts: Carries the LocalBus path across an engineered carrier route.
- Multiple-enclosure arrangements: Serves layouts whose interconnecting cable is installed in conduit.
- Controlled extension lengths: Applies where the complete carrier-and-extender route remains within 6.5 m.