Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports A4 keying and 16-pin mass-termination checks for VE4005S2B3.

VE4005S2B3

/ 4.9
1001 reviews | Need a Specific Revision?
Emerson VE4005S2B3 is a 8-channel 4-20 ma hart analog output card with 16-pin mass termination block for DeltaV M-series Traditional I/O.
In Stock
Ships by Thursday, October 29
Fast Shipping Available
Get a quick price for VE4005S2B3
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for VE4005S2B3

  • Manufacturer:
    Emerson
  • Part Number:
    VE4005S2B3
  • Product Family:
    DeltaV
  • Product Type:
    8-Channel 4-20 mA HART Analog Output Card with 16-Pin Mass Termination Block
  • Stock:
    1
  • Number of Channels:
    8
  • Nominal Signal Range:
    4 to 20 mA
  • Full Signal Range:
    1 to 23 mA
  • Card Keying:
    A4
  • Isolation:
    1500 V DC factory test
  • LocalBus Current:
    100 mA typical; 150 mA maximum at 12 V DC
  • Field Circuit Power:
    300 mA maximum at 24 V DC (+/-10%)
  • Accuracy:
    0.25% of span over temperature range
  • Resolution:
    12-bit
  • Output Compliance:
    20 mA at 21.6 V DC supply into 700 ohms load
  • Calibration:
    Information stored on card
  • Optional Fuse:
    2.0 A
  • Minimum DeltaV Version:
    v10.3.1
  • Termination Block:
    16-pin mass termination block
  • Operating Temperature:
    -40 to 70 °C
  • Storage Temperature:
    -40 to 85 °C
  • Relative Humidity:
    5 to 95%, non-condensing
  • Airborne Contaminants:
    ISA-S71.04-1985 Class G3; conformal coating
  • Protection Rating:
    IP20
  • Shock:
    10 g half-sine wave for 11 ms
  • Vibration:
    1 mm peak-to-peak from 5 to 16 Hz; 0.5 g from 16 to 150 Hz
  • System Controllers:
    MQ, MX, or PK controllers
  • Supported Carriers:
    M-series horizontal or VerticalPlus carriers
  • Estimated shipping dimensions:
    Product dimensions: 10.7 x 4.1 x 10.5 cm (H x W x D).
  • Tariff Code:
    Please confirm the destination before shipping
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Output Review Interface Review System Matching

Features:

  • Eight HART outputs: The card provides eight isolated 4-20 mA analog output channels.
  • Defined output performance: The documented full range is 1 to 23 mA with 0.25% span accuracy.
  • Order-specific termination: The exact model includes a 16-pin mass termination block.

VE4005S2B3 is an order-specific DeltaV M-series I/O assembly combining the documented card function with the listed termination block.

Engineering review should match the signal type, channel count, card keying, terminal block, controller, carrier, and required DeltaV software level.

Procurement should compare the complete VE4005S2B3 code with the installed label because adjacent table rows describe materially different termination options.

Availability is subject to Apter Power's current inventory and sourcing confirmation.

Emerson VE4005S2B3 Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Emerson VE4005S2B3 8-Channel 4-20 mA HART Analog Output Card with 16-Pin Mass Termination Block Specs

General

  • ManufacturerEmerson
  • ModelVE4005S2B3
  • ConditionNew and factory sealed
  • Product FamilyDeltaV M-series Traditional I/O

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Channel count: Match eight 4-20 mA HART output loops.
  • Full range: The documented full range is 1 to 23 mA.
  • Accuracy: The official accuracy is 0.25% of span over temperature.
  • Resolution: The card uses 12-bit output resolution.
  • Isolation: Each channel is isolated from the system and tested to 1500 V DC.
  • Compliance: The official compliance is 20 mA at 21.6 V DC into 700 ohms.
  • Termination: Use the documented 16-pin mass termination block.
  • Version: This order code is supported on DeltaV v10.3.1 and later.
  • Card key: Match A4 keying before insertion.
  • Carrier: Use an M-series horizontal or VerticalPlus carrier.
  • Controller: Confirm an MQ, MX, or PK controller environment.
  • Identity: Verify VE4005S2B3 on the label and procurement record.
Description

The VE4005S2B3 is an Emerson 8-channel 4-20 ma hart analog output card with 16-pin mass termination block in the DeltaV M-series Traditional I/O family.

VE4005S2B3 provides eight isolated 4-20 mA HART analog output channels for DeltaV M-series Traditional I/O.

Before ordering VE4005S2B3, confirm the 8-channel HART output card, A4 keying, 16-pin mass termination block, software version, and complete code.

Alternative Names
Emerson VE4005S2B3 EMR VE4005S2B3 VE4005S2B3 VE4005-S2-B3 VE4005 S2 B3 DeltaV VE4005S2B3 VE4005S2B3 8-channel HART analog output card Emerson DeltaV VE4005S2B3
Technical notes
Emerson VE4005S2B3 uses 16-pin mass termination block in the DeltaV M-series Traditional I/O platform. Confirm the 8-channel HART output card, A4 keying, 16-pin mass termination block, software version, and complete code.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is Emerson VE4005S2B3 used for?
It provides eight isolated 4-20 mA HART analog output channels for DeltaV M-series Traditional I/O. Verify the complete model before ordering.
Which product family includes VE4005S2B3?
VE4005S2B3 is listed in the Emerson DeltaV M-series Traditional I/O product data sheet.
How should VE4005S2B3 be verified before ordering?
Check confirm the 8-channel HART output card, A4 keying, 16-pin mass termination block, software version, and complete code.
Which termination applies to VE4005S2B3?
Emerson lists 16-pin mass termination block for the exact VE4005S2B3 order code.
Is VE4005S2B3 active or discontinued?
The current March 2026 Emerson product data sheet lists VE4005S2B3 and does not state that it is discontinued.
Is an official replacement documented for VE4005S2B3?
No replacement is identified in the reviewed Emerson PDS. Do not treat an adjacent order code as interchangeable without engineering review.
Where can I get the VE4005S2B3 datasheet and request a quote?
After upload, the Manuals tab will contain the Apter-hosted datasheet. Send the required quantity, destination, and delivery target to Apter Power.

Product Browsing History