Features:
- Provides eight mA/V analog-output channels in the Nexus platform.
- Supports HART communication on the documented MHO50 output function.
- Operates from a 24 VDC supply with 6.7 W rated input power.
The current ordering configuration is 369B1842G5004, mapped by GE Vernova to the MHO50 Nexus analog-output module.
It processes controller commands and drives eight analog output channels for industrial process-control and data-acquisition functions.
Verify the matching Nexus base, output signal selection, 24 VDC source and enclosure certification before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for GE Vernova 369B1842G5004:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Drives eight analog actuator or final-control signals in a Nexus process-control panel.
- Supports HART-enabled analog output loops where the MHO50 channel design is specified.
- Provides intelligent output processing for documented Nexus industrial-control assemblies.
- HART capability is integrated with the documented eight-channel analog-output function.
- The module communicates with other Nexus control modules inside the panel-mounted system.
- Field-loop connection must follow the signal type and channel wiring assigned to the MHO50 base.
- Eight mA/V channels deliver controller output commands to connected field circuits.
- The on-module processor supports intelligent processing of commanded output data.
- Each channel must be configured for the output range used by the connected final element.
- The cited certificate covers MHO50 as a panel-mounted industrial process-control module.
- Hazardous-area installation requires an ATEX-certified enclosure with at least IP54 protection.
- The end-use enclosure must be tool secured and grounded according to the certificate conditions.