Features:
- Offers sixteen relay output circuits in one Series Three module.
- Switches compatible field loads across a 5-265 VAC or VDC range.
- Uses both 5 VDC and 12 VDC portions of the rack power budget.
General Electric IC630MDL380 uses relay contacts where an installation needs compatible AC or DC switching from a single output module.
The controller operates the contacts, while field voltage and load current come from external circuits with their own protection.
Its 40 mA demand at 5 VDC and 640 mA demand at 12 VDC must both fit within the available Series Three supply capacity.
The General Electric IC630MDL380 Series Three 16-Circuit 5-265 VAC/VDC Relay Output Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC630MDL380 Series Three 16-Circuit 5-265 VAC/VDC Relay Output Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Relay Output Structure
- Circuit Quantity: Sixteen relay outputs are provided in one Series Three position.
- Contact Switching: Controller logic operates contacts in the external field circuits.
- External Power: The connected AC or DC load receives energy from its own field supply.
- Circuit Protection: Each installation must provide protection suited to the voltage and load.
AC and DC Loads
- Voltage Span: The published switching range extends from 5 to 265 VAC or VDC.
- Load Review: Steady current and switching behavior must remain compatible with relay outputs.
- Field Separation: External wiring carries the load power rather than the controller backplane.
- Supply Check: The chosen field source must match every connected device and protective component.
Two-Rail Rack Budget
- 5 VDC Load: The module is assigned 4 load units, equal to 40 mA, at 5 VDC.
- 12 VDC Load: Its 64 load-unit entry represents 640 mA at 12 VDC.
- Rail-by-Rail Check: Capacity must be available on both Series Three supply rails.
- Expansion Margin: Relay-module demand should be combined with all existing rack loads.
Output Type Selection
- IC630MDL375: Uses sixteen AC output circuits arranged as two commoned groups.
- IC630MDL376: Provides eight AC output circuits with individual isolation.
- IC630MDL380: Provides sixteen relay circuits for compatible AC or DC loads.
- Decision Factor: Choose the output structure, isolation method, and field-voltage range required by the load design.