Features:
- Mapped field-terminal interface
- ELCO, Phoenix Contact, and WAGO examples
- Signal and supply contact organization
H7015A provides a defined transition between HIQuad I/O cabling and organized field terminals.
The published connector mappings help trace signal and supply contacts through multipole plugs without treating a mechanically similar terminal as equivalent.
Replacement planning starts with the I/O module, cable assembly, contact map, polarity, shield rules, and the original loop-test documentation.
The HIMA H7015A HIQuad Terminal Module is available for quotation, official documentation, and configuration support from Apter Power.
HIMA H7015A HIQuad Terminal Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Defined contact mapping
- Function: H7015A translates the rack-side connector arrangement into documented field-side signal and supply contacts.
- Selection impact: Point numbers must be traced against the project drawing before any conductor is moved.
Supported connectors
- Function: H7015A documentation covers ELCO 8016, Phoenix Contact, and WAGO terminal arrangements used with HIQuad wiring assemblies.
- Selection impact: The H7015A cable and terminal combination is selected from the associated I/O module rather than connector appearance.
Loop preservation
- Function: Polarity, shield treatment, conductor identification, supply grouping, and hazardous-area separation must be retained during H7015A replacement.
- Selection impact: Continuity, channel diagnostics, and the required functional proof test complete the reconnection.
H7015A field-wiring assemblies
- Function: H7015A is used to terminate field signals for emergency shutdown, fire-and-gas detection, burner control, and process interlocks in HIQuad cabinets.
- Selection impact: Only the connector and channel mappings documented for the installed I/O assembly may be used.