Features:
- Four safe analog input channels
- 0–2 V DC direct measurement
- Protected 26 V DC loop supply
FS-SAI-0410 accepts conditioned field signals through the documented converter arrangement and delivers supervised analog values to the Safety Manager application.
Converter selection, scaling, loop power and diagnostic thresholds must be reviewed as one signal chain before commissioning.
Converter selection, loop power, scaling and diagnostic limits should be validated as one signal chain rather than as independent module settings.
The Honeywell FS-SAI-0410 4-Channel Safe Analog Input Module is available for quotation and technical support from Apter Power.
Verified resources for FS-SAI-0410:
Signal Data:
- Direct range 0–2 V DC
- Input resistance above 100 kΩ
- 12-bit conversion
Include module and converter accuracy when setting application trip margins.
Converter Fit:
- BSAI-04x for analog conversion
- BSDIL-0426 for loop-monitored digital use
- Verify range and channel wiring
Do not connect a 4–20 mA loop directly without the specified conversion arrangement.
Safety Use:
- Four supervised safety channels
- Short-circuit-protected loop supply
- Migration parameters require review
Validate diagnostic coverage and application scaling for the complete installed loop.
Installation Check:
- Verify 26 V loop power
- Inject calibrated test signals
- Confirm alarms, scaling and trip action
Document the as-left readings for every commissioned channel.