Product overview:
- One controller-resident license for each meter run
- Gas and liquid electronic flow metering
- Four non-redundant or twelve redundant meter runs maximum
Honeywell SP-MRUN01 licenses one electronic flow-metering run on one ControlEdge RTU. The entitlement is allocated per meter run, so an RTU configured with four runs requires four SP-MRUN01 licenses.
ControlEdge RTU supports gas and liquid metering together, with documented limits of four runs on a non-redundant controller and twelve runs on a redundant controller. Logged metering data can be exposed through Enron Modbus responder or DNP3 according to the engineered system design.
Before ordering SP-MRUN01, confirm the exact number of runs, controller redundancy, measurement standard and data-retrieval protocol. Each run should be validated against its transducers, calculation method, archive interval and custody-transfer procedure before service.
Verified resources for SP-MRUN01:
License Data:
- Allocation: one license per run per RTU
- Non-redundant limit: four runs
- Redundant limit: twelve runs
Use the documented SP-MRUN01 entitlement or release data when planning the engineering environment.
Compatibility:
- Match the license count to configured runs
- Confirm controller redundancy and firmware
- Select the required metering standard
Compatibility for SP-MRUN01 depends on the exact software release, controller firmware and validated project revision.
Deployment:
- Allocate a license to each run
- Configure metering and archive parameters
- Map Enron Modbus or DNP3 access
Deploy SP-MRUN01 under controlled engineering access and retain the installation and entitlement records.
Installation Check:
- Count licensed and configured runs
- Validate live and calculated values
- Test log retrieval and time stamping
Complete release, project and communication checks before SP-MRUN01 is used on a production system.