Features:
- Flux Vector Control for Both Asynchronous & Synchronous Motors
- Integrated STO (Safe Torque Off) with Redundant Inputs
- Built-in Dual-Protocol Fieldbus (Modbus + CANopen)
The Schneider Electric ATV32HU15N4 eliminates the need for optional encoder cards or motor-specific firmware. It automatically adapts to IM or SM, delivering high torque accuracy (±15%) and speed precision (±10% of slip) in open-loop mode – ideal for retrofits and mixed-motor machinery.
Designed for machine safety compliance, the Schneider Electric ATV32HU15N4 embeds SIL2 / PL d certified STO via two independent channels. No external safety relay is required for basic stop functions, significantly reducing cabinet complexity and cost while meeting EN/IEC 61800‑5‑1.
The Schneider Electric ATV32HU15N4 ships standard with RJ45 ports for Modbus and CANopen, allowing simultaneous connection to HMI, PLC, or daisy‑chained drives. This reduces gateway hardware and commissioning time, with optional Profibus DP, DeviceNet, or Ethernet/IP cards for broader integration.
The ATV32HU15N4 Schneider Electric Altivar 32 Series 1.5kW 3-Phase 380-500V Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV32HU15N4 Altivar 32 Series 1.5kW 3-Phase 380-500V Variable Speed Drive Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV32HU15N4 Altivar 32 Series 1.5kW 3-Phase 380-500V Variable Speed Drive
General
- Manufacturer Schneider Electric
- Model ATV32HU15N4
- Condition New Original ready stock
- Product Family ATV312HU15N4,ATV32HD15N4,ATV320U22N4C
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Global safety compliance – The Schneider Electric ATV32HU15N4 carries CE, UL, CSA, GOST, C-Tick, and NOM 117 markings, allowing legal installation in North America, Europe, Russia, Australia, and Mexico without re-certification.
- EMC performance – Certified to EN 61800‑3 (Environment 1 & 2, Category C2) and EN 55011 Class A Group 1, it integrates a C2 EMC filter that reduces conducted emissions – critical for machinery sold into the EU or US markets.
- Functional safety – STO function is certified to IEC 61508 SIL2 and EN ISO 13849‑1 PL d, enabling integration into safety circuits up to Category 3 (with external Preventa module) without derating the drive’s MTBF.
- Environmental durability – Tested to IEC 60068‑2‑6 (vibration: 1 gn, 13-200 Hz) and IEC 60068‑2‑27 (shock: 15 gn/11 ms), suitable for road transport, mobile equipment, and high‑vibration industries like sawmills or crushers.
- Local LED diagnostics – Four red/green LEDs on the front panel indicate drive voltage, CANopen status, and fault conditions, enabling first-line troubleshooting without a laptop.
- Analog and relay feedback – One configurable analog output (0-20 mA or 0-10 V) can map to motor current, frequency, or torque, while three relay outputs (two form C, one form A) signal run state, fault, or speed threshold.
- Remote parameter management – Using SoMove software or any Modbus RTU master (e.g., PLC, HMI), all drive parameters (over 300 objects) can be read/written via register addresses, supporting bulk configuration and predictive maintenance.
- PID regulator integration – The built-in adjustable PID loop accepts an external sensor (pressure, flow, level) directly into analog input AI3 (4‑20 mA), closing the loop inside the drive – no external controller needed.
- Complex packaging machinery – The Schneider Electric ATV32HU15N4 handles intermittent high-torque demands (up to 200% transient overtorque), ideal for wrappers, cartoners, and labeling machines where register accuracy is critical.
- Small to medium conveyors – With 0.5…599 Hz output range and adjustable PID loop, it maintains constant belt speed under varying loads, even in washdown‑exposed areas (IP20 requires external enclosure).
- Woodworking and textile equipment – The built-in dynamic braking (≤170% torque with resistor) and high switching frequency (up to 16 kHz) reduce acoustic noise and provide rapid deceleration for router spindles or looms.
- Fan and pump retrofits – Energy-saving quadratic U/F profile reduces power consumption by up to 30% for centrifugal loads, while the integrated Modbus allows remote setpoint adjustment from a BMS or SCADA.