Features:
- Direct coupling between 380 to 460V industrial power networks and asynchronous or synchronous motor systems via the ATV610D15N4
- 15kW variable speed control capability with built-in IEC 61800-3 category C3 EMC filtering integrated into the ATV610D15N4
- Application flexibility for fan, pump, compressor, and conveyor equipment within the ATV610D15N4 Easy Altivar 610 standard version
The ATV610D15N4 operates as the 15kW variable speed drive in the Schneider Electric Easy Altivar 610 range, providing reliable motor control for industrial automation systems. It continuously converts incoming three-phase power within the 380 to 460V input range to variable frequency output and distributes this regulated power to asynchronous or synchronous motors. Integrated EMC filtering conforming to IEC 61800-3 category C3 with 50 m cable compliance is standard with the ATV610D15N4, eliminating the need for external filtering accessories in typical installations. Forced convection cooling maintains thermal stability during continuous 15 kW (20 hp) operation, while the IP20 degree of protection designates the ATV610D15N4 for cabinet mount installations within controlled electrical enclosures.
The ATV610D15N4 provides essential motor control functions for fan, pump, compressor, and conveyor applications, and is a critical component of the automation path, directly affecting the proper, normal operation of the overall drive system. One ATV610D15N4 unit is required per motor installation depending on the specific 15 kW power and control requirements. The ATV610D15N4 is designed exclusively for cabinet mount configuration and must be installed within an appropriate electrical enclosure to maintain IP20 protection integrity and ensure adequate airflow for the forced convection cooling system.
For dual motor type applications, the ATV610D15N4 standard version supports both asynchronous motors and synchronous motors within the same drive platform. In addition to single motor destination operation, the drive configuration accommodates either motor technology through internal parameter selection. The ATV610D15N4 motor control system executes power delivery using the internal drive architecture specified in the Easy Altivar 610 design. Using this method, the ATV610D15N4 continually maintains operational readiness for both asynchronous and synchronous motor types. If the system detects that the configured motor parameters are outside the supported 15 kW operational range, it will automatically restrict drive output and register a configuration status event within the system log.
The ATV610D15N4 Schneider Electric Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV610D15N4 Variable Speed Drive Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV610D15N4 Variable Speed Drive Specs
General
- Manufacturer Schneider Electric
- Model ATV610D15N4
- Condition New Original ready stock
- Product Family ATV610C11N4,ATV610D45N4,ATV610D90N4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Water & Wastewater: Submersible pumps, centrifugal pumps, booster pumps, lifting stations, and aeration blowers.
- Oil & Gas: Circulating pumps, oil transfer pumps, compressions systems, and cooling fans.
- Building Management: Commercial HVAC systems, exhaust fans, air handling units (AHU), and circulation systems.
- Process Engineering: Industrial fans, cooling tower elements, conveyors, and generic machine management utilities.
- Positioning: Must be mounted in a strictly vertical position to ensure efficient forced convection cooling.
- Spacing: Requires clear clearance margins above, below, and to the sides to prevent thermal pockets. Side-by-side mounting is supported with proper derating adjustments.
- Environment: Protected at an IP20 rating. Electronic cards feature protective coatings rated for chemical class 3C3 and mechanical class 3S3 (IEC/EN 60721) to withstand harsh ambient conditions.
- Control & Power Terminals: Screw terminals accommodate 0.5...1.5 mm² wiring for control logic, and 6...16 mm² conductors for both line side supply and motor connections.
- Native Protocols: Built-in 2-wire RS-485 physical interface running Modbus serial protocol via an RJ45 port.
- Expandability: Supports optional communication modules like Profibus DP V1 alongside optional digital/relay I/O expansion modules.