Features:
- Connection Between Industrial 460V Power Infrastructure and 100HP Motor Loads
- Unification of AC Motor Control with Multiple Variable Frequency Profiles
- Suitability for Pumping and Ventilation System Integration
The ATV61HD75N4 functions as the primary motor control device in industrial pumping and ventilation applications, supplying regulated variable frequency power to 100HP asynchronous motors operating on 460V networks. It continuously transforms incoming AC line power into precisely controlled output to maintain optimal pump and fan performance across varying operational demands. Smooth acceleration and deceleration control is standard with the ATV61HD75N4, however utilizing the Flux Vector Control Without Sensor option will deliver enhanced torque accuracy and dynamic speed regulation for demanding mechanical loads. The ATV61HD75N4 offers expanded control capabilities compared to basic drive designs in addition to incorporating multiple motor control profiles within the Altivar 61 product range.
The ATV61HD75N4 delivers essential speed regulation functions required for pumping and ventilation machinery, and serves as a critical element of the process control infrastructure, directly influencing the proper, efficient operation of fluid and air handling systems. Selection of the appropriate control profile for the ATV61HD75N4 is required per application based on specific performance requirements. The ATV61HD75N4 installs in standard industrial configurations and interfaces directly with the motor power circuit and control systems.
For Energy Saving applications, the ATV61HD75N4 supports the Voltage/Frequency ratio - Energy Saving mode with quadratic U/f characteristic. In addition to standard linear V/F operation, this specialized configuration also performs automatic voltage reduction. The ATV61HD75N4 energy optimization function executes power savings using the quadratic U/f algorithm specified in the control profile options. Using this method, the drive system continually monitors the load conditions. If the system detects that the pump or fan application requires reduced power at lower speeds (following the centrifugal load curve), it will automatically decrease the output voltage proportionally and minimize energy consumption during partial load operation.
The ATV61HD75N4 Schneider Electric Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV61HD75N4 Variable Speed Drive Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV61HD75N4 Variable Speed Drive Specs
General
- Manufacturer Schneider Electric
- Model ATV61HD75N4
- Condition New Original ready stock
- Product Family ATV630D75N4,ATV630D90N4,ATV61HD55N4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Field Upgradability: Standard ATV61 and ATV71 drive firmware cannot be upgraded in the field.
- Upgrade Method: Firmware updates typically require sending the main control board to a Schneider Electric Industrial Repair Center or purchasing a replacement board with the latest firmware.
- Identification: Current firmware versions can be verified via the drive's Identification Menu (1.11) or on the silver nameplate sticker on the side of the unit.
- Compatibility Note: A minimum firmware version of V1.5 IE13 is required for compatibility with specific option cards like the VW3A3316 Ethernet IP card.
- Pumping: Centrifugal pumps, booster stations, and irrigation systems.
- Ventilation: Air handling units, cooling tower fans, and industrial exhaust systems.
- Machine Control: Low-inertia machines and vertical movements (with proper safety configurations like stopping category 0).
- Motors: Compatible with both asynchronous and synchronous motors.
- Networks: Integrated with Modbus (RJ45) and CANopen (SUB-D 9) as standard.
- Optional Connectivity: Supports additional cards for BACnet, DeviceNet, Ethernet/IP, Metasys N2, LONworks, and Apogee P1.