Features:
- Measures power and energy on single-, two- and three-phase electrical systems.
- Analyzes individual harmonics through the sixty-fourth order and calculates THD.
- Links recorded values to supervisory systems through integrated Modbus TCP.
The voltage connection and current-transformer settings establish the measurement basis of 7KM4212-0BA00-3AA0.
Internal counters and time-stamped records organize energy information before external retrieval.
Digital channels and expansion slots separate direct status functions from optional communications.
The Siemens 7KM4212-0BA00-3AA0 SENTRON PAC4200 may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 7KM4212-0BA00-3AA0 SENTRON PAC4200 Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Communication Architecture
- Native Ethernet: Modbus TCP is available through the integrated network interface.
- Gateway role: The meter can pass data between Ethernet and an attached serial network.
- Optional paths: Expansion modules add Modbus RTU, PROFINET or PROFIBUS communication.
- Slot boundary: Two expansion positions are shared by communication and other supported options.
Local Data Organization
- Meter set: Ten energy counters separate the configured consumption and generation quantities.
- Tariff logic: Energy values can be accumulated under selectable tariff conditions.
- Trend record: Load profiles store measured demand over configured intervals.
- Event context: Limit changes and device events carry time stamps for later review.
Status and Pulse Channels
- Input count: Two multifunction digital inputs receive external status information.
- Output count: Two multifunction outputs provide pulse or switching functions.
- Function assignment: Each channel is configured for the required monitoring or signaling role.
- Wiring check: The terminal assignment and parameter function must correspond before energization.
Mounting Environment
- Front format: The display and controls occupy a 96×96 mm panel position.
- Orientation: The PAC4200 is mounted vertically in the fixed panel.
- Room condition: Installation is specified inside an enclosed, dry electrical room.
- Connection planning: Voltage system, current input and auxiliary supply are verified independently.