Features:
- A 15-inch resistive touch panel and IPC hardware share one panel-mounted assembly.
- Dual independent Gigabit Ethernet ports separate industrial network paths.
- The configured PC includes a Core i3 processor, 2GB memory and 500GB SATA storage.
Operator input reaches
6AV7260-0DA10-0XX5 through the analog resistive display, while the integrated computer runs the installed visualization or control software.
Two PCI positions on
6AV7260-0DA10-0XX5 provide internal expansion, and its USB, serial and video connectors route peripherals without sharing the two Ethernet interfaces.
After panel installation, the IP65 front of
6AV7260-0DA10-0XX5 faces the operator area while the IP20 rear, storage drive and expansion hardware remain inside the enclosure.
The Siemens 6AV7260-0DA10-0XX5 SIMATIC IPC677D 15-Inch Panel PC may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV7260-0DA10-0XX5 SIMATIC IPC677D 15-Inch Panel PC Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Local Display and Touch Input
- Display area: The 15-inch TFT presents 1280x800 pixels for local machine visualization.
- Touch input: Analog resistive sensing converts operator contact into input for the integrated PC.
- Front access: A front USB connector supports service access from the operator side.
- Enclosure split: The mounted front is IP65 while the rear electronics remain IP20.
Processing and Storage Configuration
- Processor: A Core i3-4330TE supplies two cores and four processing threads.
- Working memory: 2GB DDR3-1600 provides the configured memory capacity.
- Local storage: A 500GB SATA hard disk stores the installed operating system and project files.
- Expansion: Two PCI slots remain available for the documented internal cards.
External Interface Routing
- Ethernet paths: Two independent RJ45 interfaces carry separate 10/100/1000Mbit/s connections.
- USB peripherals: Four USB 3.0 ports connect local peripheral equipment.
- Serial device: COM1 provides the documented RS232 communication path.
- External displays: DisplayPort and DVI-I carry video to connected screens.
Panel Fit and Hardware Supervision
- Panel cutout: The unit requires a 396x291mm opening and 112mm mounting depth.
- Mounting positions: Horizontal, vertical or portrait installation follows the documented arrangement.
- Hardware monitoring: Watchdog, internal temperature and fan conditions are supervised separately.
- Software image: This order configuration is supplied without a preinstalled operating system.