Features:
- Monitors bulk-solids flow with a SITRANS AS100 acoustic sensor.
- Uses two programmable relay outputs and an isolated 4-20 mA output.
- Supports DIN-rail installation and local setup through the display and four buttons.
The Siemens 7MH7562-4AA is a SITRANS CU02 alarm control unit for bulk-solids flow monitoring. It operates with a SITRANS AS100 acoustic sensor to provide continuous process protection.
This 230 V AC configuration combines relay and analog outputs so that the monitored flow condition can be linked to alarm and control circuits.
The DIN-rail-mounted CU02 can be installed separately from its sensor, with the control unit positioned up to 500 m away.
The Siemens 7MH7562-4AA SITRANS CU02 Alarm Control Unit may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 7MH7562-4AA SITRANS CU02 Alarm Control Unit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
AS100 Signal Relationship
- Sensor: 7MH7562-4AA operates with the SITRANS AS100 acoustic sensor.
- Monitored condition: The paired devices detect changes in bulk-solids flow.
- Separation: The control unit may be positioned up to 500 m from the sensor.
Relay and Analog Signaling
- Relay channels: Two programmable Form C relays provide alarm contacts.
- Contact rating: Each relay is rated 5 A at 250 V AC.
- Analog signal: An isolated 4-20 mA output represents the monitored condition.
Front-Panel Configuration
- Display: Local values and setup information are presented on the CU02 display.
- Controls: Four front-panel buttons support programming and calibration.
- Supply: The 7MH7562-4AA order code specifies 230 V AC power.
DIN-Rail Installation
- Enclosure: The 7MH7562-4AA uses the standard DIN-rail configuration.
- Panel position: The control unit remains accessible for display reading and button operation.
- Signal routing: Sensor wiring and output wiring terminate at the CU02 control unit.