Features:
- The exact A5E reference identifies an internal MICROMASTER 430 power driver board.
- Repair index WLX_309474 ties the assembly to the documented MM430 record.
- D/E GAP frame grouping and 400 V class must be checked together during replacement.
Siemens A5E02915324 is installed inside the MICROMASTER 430 drive electronics.
The ordering identity of A5E02915324 combines the A5E code with WLX_309474, D/E GAP, and the 400 V class.
Connector layout and drive nameplate data should be captured before A5E02915324 is removed from the original unit.
The Siemens A5E02915324 record does not publish standalone motor ratings or firmware; match the complete drive and board identification.
Siemens A5E02915324 MICROMASTER 430 Power Driver Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Exact Board Identification
- A5E code: Use A5E02915324 as the primary assembly reference.
- Repair index: WLX_309474 is the associated repair-part identifier.
- Nameplate: Record the original board and drive markings before removal.
- Visual check: Connector positions and board revision markings must agree with the installed unit.
MICROMASTER 430 Placement
- Drive family: The record places the board in the MICROMASTER 430 platform.
- Internal role: The assembly operates inside the drive electronics.
- System ratings: Motor and line ratings belong to the complete drive, not to this board alone.
- Replacement scope: The board reference does not establish compatibility with every MM430 unit.
D/E GAP and Voltage Match
- Frame group: The documented repair record names D/E GAP.
- Voltage class: The associated drive class is 400 V.
- Combined check: Frame and voltage must be verified together.
- Partial match: A shared 430 family name is not enough to confirm fit.
Pre-Removal Records
- Power state: The drive must follow its documented isolation and discharge procedure.
- Connector labels: Photograph and label every connector before disconnection.
- Board marking: Capture the complete A5E number and any visible revision.
- Drive data: Retain the drive nameplate and frame information with the replacement record.