Features:
- Designed for the SINAMICS G120 Modular Drive System
- Provides Variable Frequency Motor Control with Integrated Braking Chopper
- Supports High Overload and Low Overload Industrial Applications
The SIEMENS 6SL3210-1PE21-4UL0 Power Module functions as a PM240-2 Power Module within the SINAMICS G120 drive platform, providing efficient power conversion and motor control for three-phase AC motors. Operating with a 380–480 VAC, 47–63 Hz power supply, the 6SL3210-1PE21-4UL0 Power Module delivers reliable variable frequency output while incorporating an integrated braking chopper for applications requiring controlled deceleration. Designed without an internal EMC line filter, the 6SL3210-1PE21-4UL0 Power Module allows users to select suitable external filtering solutions according to installation requirements.
The SIEMENS 6SL3210-1PE21-4UL0 Power Module serves as the primary power stage of a SINAMICS G120 drive system and operates together with compatible SINAMICS Control Units such as the CU240E-2 or CU250S-2. As a modular drive component, the 6SL3210-1PE21-4UL0 Power Module provides dependable speed regulation, stable torque output, and overload capability for industrial equipment including conveyors, pumps, fans, compressors, and material handling systems. Its compact FSB frame and forced-air cooling design allow straightforward installation within standard industrial control cabinets.
For complete drive operation, the 6SL3210-1PE21-4UL0 Power Module must be combined with a compatible SINAMICS G120 Control Unit and commissioned through an optional operator panel or engineering software. The integrated braking chopper enables connection to an external braking resistor when regenerative braking is required, while an external EMC line filter can be installed where electromagnetic compatibility regulations apply.
The 6SL3210-1PE21-4UL0 SIEMENS Power Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
SIEMENS 6SL3210-1PE21-4UL0 Power Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
SIEMENS 6SL3210-1PE21-4UL0 Power Module Specs
General
- Manufacturer SIEMENS
- Model 6SL3210-1PE21-4UL0
- Condition New Original ready stock
- Product Family 6SL3244-0BB12-1FA0,6SL3244-0BB12-1PA1
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Pumps, Fans, and Compressors: Optimized for centrifugal pumps, axial fans, and positive displacement compressors requiring high energy efficiency.
- Conveyor Technology: Suitable for belt conveyors, roller systems, and chain hoists requiring stable torque management.
- Material Processing: Commonly applied in basic twisting machines, industrial mixers, kneaders, and simpler extrusion setups.
- Storage and Transport Temperature: -25 °C to +55 °C (-13 °F to 131 °F).
- Relative Humidity: Maximum 95% relative humidity during operation. The environment must remain free from condensation, splash water, moisture, and icing.
- Environmental Classification: Rated under class 3K3 specifications in accordance with IEC 60721-3-3:2002.
- Modular Architecture: This module functions exclusively as a power stage. To create a fully operational frequency inverter, it must be paired with a compatible SINAMICS Control Unit (CU) (such as the CU240E-2 or CU250S-2 series) and an optional Operator Panel (BOP-2 or IOP-2).
- Designed for vertical panel mounting inside an IP20 or UL open-type control enclosure.
- Sufficient clear space must be maintained above and below the device to prevent thermal recirculation and choking.
- External braking resistors must be attached directly to the cabinet wall to ensure proper heat dissipation and avoid overheating adjacent modules.