Features:
- Combines the IOP-2 panel with a portable housing and power accessories.
- Supports commissioning, control, diagnostics and setting transfer.
- Includes separate RS232 and USB cables for converter and PC-side tasks.
6SL3255-0AA00-4HA1 is the handheld kit article, rather than the panel-only IOP-2 reference.
Its supplied housing and rechargeable battery set allow the operator panel to be carried to the converter.
Cable choice changes with the converter family because G120D and ET 200pro FC-2 use an optical interface.
The Siemens 6SL3255-0AA00-4HA1 IOP-2 Handheld may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SL3255-0AA00-4HA1 IOP-2 Handheld Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Handheld Assembly
- Operator hardware: The kit contains the IOP-2 and its handheld housing.
- Portable power: Four rechargeable AA batteries and an international charging unit are supplied.
- Drive lead: A 3 m RS232 cable connects the supported G120 converter families.
- USB lead: A separate 1 m cable provides the USB-side connection.
Cable Choice by Drive
- Included lead: The 3 m RS232 cable serves G120, G120C, G120P and G120X.
- Optical interface: G120D requires cable 3RK1922-2BP00.
- Distributed drive: ET 200pro FC-2 uses the same separately ordered optical cable.
- Identity check: Connector requirements follow the converter family, not the IOP-2 screen appearance.
Portable Drive Interaction
- Commissioning: Guided access supports initial converter setup.
- Troubleshooting: Diagnostic information can be viewed at the connected drive.
- Control: The handheld interface permits direct operator commands.
- Data handling: Parameter sets can be backed up and transferred between supported units.
Handheld Operating Envelope
- In service: Operation is limited to 0–40 °C.
- Out of service: Storage and transport are specified from −20 to 55 °C.
- Humidity: Relative humidity may reach 95% at 25 °C.
- Enclosure: The handheld assembly is IP20 / UL open type.