Features:
- 6SY7010-0AA04 maps the Siemens order code to the TT500N16-KOF dual-thyristor device.
- The same module is identified for 850 A two-quadrant and four-quadrant armature converters.
- A pressure-contact package and insulated baseplate define the semiconductor’s mechanical interface.
The 6SY7010-0AA04 entry belongs to the armature-converter portion of the SINAMICS DCM spare-parts structure. Its order identity stays tied to the complete suffix, even though the component designation is printed separately as TT500N16-KOF.
Two-quadrant and four-quadrant tables use different recommended spare counts. Reading the quantity together with the converter topology prevents the six-module 4Q listing from being applied to the three-module 2Q row.
The module ratings and the converter where-used rating answer different questions: 500 A and 1600 V identify the thyristor device, while 850 A identifies the documented converter class.
The Siemens 6SY7010-0AA04 Dual Thyristor Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SY7010-0AA04 Dual Thyristor Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Semiconductor Construction
- SCR pairing: TT500N uses an SCR/SCR phase-control configuration rather than a single switching device
- Contact system: Pressure-contact construction carries the current path through the module package
- Base interface: An electrically insulated baseplate separates the power device from its mounting surface
- Housing reference: The TT500N mechanical platform uses a 60 mm baseplate class
Two-Quadrant Parts Context
- Converter row: 6SY7010-0AA04 appears in the 480 V, 850 A two-quadrant armature-converter table
- Spare quantity: The recommended spare entry for this 2Q row is three modules
- Code check: The complete 0AA04 suffix is retained in the two-quadrant listing
- Scope limit: The 850 A figure belongs to the converter row, not to the single module rating
Four-Quadrant Parts Context
- Converter row: The four-quadrant 480 V table also assigns 6SY7010-0AA04 to the 850 A class
- Spare quantity: Six modules are recommended for the documented 4Q arrangement
- Shared device: Both converter directions retain the same TT500N16-KOF semiconductor designation
- Topology check: The 4Q quantity must be read from its own row rather than copied from the 2Q entry
Device and System Boundaries
- Module current: The Siemens order record identifies a 500 A thyristor module
- Blocking class: The device is specified for a 1600 V repetitive blocking-voltage class
- Temperature basis: TT500N reaches its 500 A average-current rating at an 85 °C case condition
- Distinction: Neither the 2Q nor 4Q 850 A converter class changes the module-level electrical limits