Features:
- Four analog input channels for ET 200B stations
- Voltage and current measurement ranges with 12-bit conversion
- Configurable diagnostics and limit alarms
Siemens 6ES7134-0HF01-0XB0 is a four-channel analog input module that maps voltage or current sources to an ET 200B station.
For each channel, 6ES7134-0HF01-0XB0 provides the stated current and voltage range selections with 12-bit conversion.
A maximum 5 ms all-channel conversion interval and the TB8 terminal block define the measurement timing and field connection point of Siemens 6ES7134-0HF01-0XB0.
The Siemens 6ES7134-0HF01-0XB0 ET 200B 4AI Analog Input Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7134-0HF01-0XB0 ET 200B 4AI Analog Input Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Supported measurement signals
- Current: 0 to 20 mA, 4 to 20 mA, and minus 20 to plus 20 mA ranges are documented.
- Voltage: Voltage ranges extend from minus 1.25 to plus 1.25 V through minus 10 to plus 10 V.
- Channels: Four analog inputs share the ET 200B module format.
Channel processing
- Resolution: The analog conversion uses 12-bit resolution.
- Cycle time: All channels complete a conversion cycle within 5 ms maximum.
- Terminal block: TB8 is the usable terminal block for the module.
Monitoring options
- Diagnostics: Module diagnostics are configurable.
- Limit alarms: Configurable limit alarms support signal supervision.
- Status LEDs: RUN and BF indicators provide local operating information.
Electrical boundaries
- Supply: The module uses a 24 V DC supply with an 18.5 to 30.2 V permissible range.
- Logic current: Typical logic current consumption is 70 mA.
- Power loss: Typical power loss is 1.8 W.