• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        • Lifecycle status

          Discontinued / Obsolete by OEM
          Apter Power supports 6GT2301-0CA00 quotations, manuals, and MOBY E reader checks.

        6GT2301-0CA00

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        Siemens 6GT2301-0CA00 is a MOBY E SLG 72 read/write device with an integrated antenna for 13.56 MHz communication between a SIMATIC interface module and mobile data storage units.
        In Stock
        Ships by Wednesday, October 28
        Get a quick price for 6GT2301-0CA00
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for 6GT2301-0CA00

        • Manufacturer:
          Siemens
        • Part Number:
          6GT2301-0CA00
        • Product Family:
          Siemens Simatic Net
        • Product Type:
          MOBY E SLG 72 Read/Write Device
        • Stock:
          1
        • RF Operating Frequency:
          13.56 MHz
        • Host Interface:
          RS422
        • Interface Data Rate:
          19,200 baud
        • Maximum Shielded Data Cable:
          1,000 m
        • Maximum Reader-to-Interface Distance:
          120 m at 24 V with 0.2 mm² conductors
        • Supply Voltage Range:
          20 to 30 V DC
        • Typical Current Consumption:
          180 mA
        • Brief Startup Current:
          700 mA
        • Working Distance:
          0 to 70 mm
        • Limiting Distance:
          100 mm
        • Minimum Reader Spacing:
          More than 800 mm
        • Metal-Free Clearance:
          40 mm
        • Antenna Arrangement:
          Integrated
        • Electrical Connector:
          6-pin DIN 43651
        • Enclosure Rating:
          IP65
        • Operating Temperature:
          -25 to +70 °C
        • Transport and Storage Temperature:
          -40 to +85 °C
        • Housing Material:
          Polyamide 12
        • Mounting:
          2 × M5, maximum 2 Nm
        • Weight:
          1.213 lbs (0.55 kg)
        • Estimated shipping dimensions:
          16×8×4cm
        • Tariff Code:
          84719000
        • Country of origin:
          Germany
        • Place of shipment:
          Xiamen,Fujian,China
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Coupling Zone Cable Route Mounting Clearance Power Behavior

        Features:

        • An integrated 13.56 MHz antenna exchanges data with MOBY E mobile data storage units.
        • The RS422 host path connects the reader to the SIMATIC interface module.
        • The sealed polyamide assembly combines the antenna, electronics and field connector.
        Siemens 6GT2301-0CA00 is the MOBY E SLG 72 read/write device for medium-range inductive identification.

        The reader establishes the radio coupling zone at the data carrier and returns the transferred information through its wired interface.

        Mechanical spacing from metal and other readers forms part of the installation boundary because both can alter the usable field.

        The Siemens 6GT2301-0CA00 MOBY E SLG 72 Read/Write Device may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
        Siemens 6GT2301-0CA00 MOBY E SLG 72 Read/Write Device Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

        Positioning the mobile data unit

        • Working Region: Normal communication is arranged within the documented 0 to 70 mm zone.
        • Outer Boundary: The 100 mm limiting distance marks the edge of coupling rather than a normal operating target.
        • Alignment: The integrated antenna face and the data carrier must remain inside the specified field geometry.
        • Motion Check: Available dwell time depends on how long the mobile data unit remains in the usable zone.

        Connecting the reader to the host

        • Signal Path: RS422 carries reader data to the SIMATIC interface module at 19,200 baud.
        • Reader Run: The specified 24 V and conductor condition permits up to 120 m between the two devices.
        • Route Limit: The complete shielded data-cable path is documented for lengths up to 1,000 m.
        • Voltage Check: Cable length and conductor size must preserve the required voltage at the reader terminals.

        Protecting the antenna field

        • Metal Boundary: Maintain the specified 40 mm metal-free area around the reader.
        • Reader Separation: Adjacent units require more than 800 mm spacing.
        • Fastening: Two M5 points secure the housing with tightening torque limited to 2 Nm.
        • Connector Seal: The six-pin connection must be correctly assembled to preserve the enclosure boundary.

        Allowing for startup and operation

        • Supply Window: The reader operates from a 20 to 30 V DC source.
        • Normal Demand: Typical current is 180 mA after startup.
        • Startup Demand: A brief 700 mA current must be supported when power is applied.
        • Field Assembly: The integrated electronics and antenna share the same supplied enclosure and connector path.
        Description
        Siemens 6GT2301-0CA00 is a MOBY E SLG 72 read/write device in the SIMATIC identification system. Its integrated antenna exchanges data with MOBY E mobile data storage units while the wired side connects the reader to an interface module.

        The host path of 6GT2301-0CA00 uses an RS422 connection operating at 19,200 baud. Under the documented 24 V cable condition, the reader can be positioned up to 120 m from the interface module, while the complete shielded data-cable route is defined for lengths up to 1,000 m.

        For transponder coupling, 6GT2301-0CA00 has a working range from 0 to 70 mm and a 100 mm limiting distance. Nearby metal changes the field boundary, so the installation keeps the specified 40 mm metal-free space and separates adjacent readers by more than 800 mm.

        A 20 to 30 V DC supply feeds 6GT2301-0CA00 through its six-pin connector. The polyamide housing integrates the antenna and electronics as one IP65 assembly, with two M5 mounting points defining the mechanical attachment.
        Alternative Names
        Siemens 6GT2301-0CA00 MOBY E SLG 72 6GT2301-0CA00 6GT2301 0CA00 6GT23010CA00 6GT2301-OCA00 6GT23O1-0CA00 SLG72 Read Write Device 6GT2301-0CA00 Siemens MOBY E 6GT2301-0CA00
        Technical notes
        Siemens 6GT2301-0CA00 links a MOBY E transponder field to an interface module through an integrated 13.56 MHz antenna and RS422 connection.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        How far can 6GT2301-0CA00 be installed from its interface module?
        Siemens 6GT2301-0CA00 supports up to 120 m between the reader and interface module under the documented 24 V and 0.2 mm² conductor condition; confirm voltage drop for the actual cable.
        What clearances should be checked before mounting 6GT2301-0CA00?
        Keep the metal-free area around 6GT2301-0CA00 at 40 mm and position neighboring readers more than 800 mm apart to avoid changing the coupling field.
        Why might 6GT2301-0CA00 fail to read near the edge of its zone?
        The 100 mm figure for 6GT2301-0CA00 is a limiting distance, not the normal operating zone. Position the data carrier within the documented 0 to 70 mm working range.
        What supply capacity should be allowed for 6GT2301-0CA00?
        Size the 20 to 30 V DC source for the normal 180 mA demand of 6GT2301-0CA00 and its brief startup current of 700 mA.
        Can 6GT2301-0CA00 be mounted where dust or water jets are present?
        The enclosure of 6GT2301-0CA00 is rated IP65 when correctly assembled; keep the six-pin connection sealed and do not treat IP65 as an immersion rating.
        What communication setting is required between 6GT2301-0CA00 and the interface module?
        Configure the RS422 path for 19,200 baud when connecting 6GT2301-0CA00, and use the specified shielded cable route for the installation length.

        You May Also Like

        Product Browsing History