Features:
- The CPU 410 SMART executes PCS 7 automation logic and coordinates distributed I/O.
- Two PROFINET IO controller interfaces, one integrated PROFIBUS DP master, and two synchronization-module interfaces define the CPU network structure.
- A 3,200-entry diagnostic buffer, SysLog support, field-interface security, password protection, and block encryption support operation and access control.
Siemens 6ES7410-5HN08-0AB0 is a CPU 410 SMART central processing unit for SIMATIC PCS 7 automation systems.
The CPU is supplied without a System Expansion Card and supports only the PO800 card for the documented 800-process-object configuration.
SIMATIC PCS 7 V9.0 or later is required to engineer this 6ES7410-5HN08-0AB0 configuration.
The Siemens 6ES7410-5HN08-0AB0 SIMATIC PCS 7 CPU 410 SMART Central Processing Unit is listed as Active / Available from OEM.
Siemens 6ES7410-5HN08-0AB0 SIMATIC PCS 7 CPU 410 SMART Central Processing Unit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
How PO800 Defines the Controller Scale
- The CPU is delivered without a System Expansion Card, so the expansion assignment is a separate configuration choice.
- Only the PO800 card is supported by this CPU order number.
- When PO800 is assigned, the documented controller configuration covers 800 process objects.
How the Field Networks Are Separated
- Two PROFINET IO controller interfaces provide independent Ethernet paths for distributed devices.
- Both PROFINET interfaces operate as IO controllers rather than as PROFINET IO devices.
- The integrated RS485 PROFIBUS interface supplies the DP-master path for a separate group of distributed slaves.
How Events and Access Are Managed
- SysLog records can be sent to as many as four receivers while a local buffer retains up to 3,200 entries.
- A separate diagnostic buffer keeps up to 3,200 controller events for troubleshooting.
- Field-interface security, user password protection, and block encryption define the available access controls.
Changes Allowed During Operation
- DP slaves and PROFINET IO devices can be activated or deactivated while the controller runs in standalone operation.
- Device activation and deactivation are not available together with Configuration in Run.
- The controller does not support changing its IP address during runtime.