Features:
- Two yellow-coded positions hold the paired IM 650-8PH interfaces used by a redundant station.
- The active backplane permits an interface module to be inserted or removed during RUN.
- Left and right interface positions retain separate I&M identities at slots 245 and 246.
Siemens 6ES7650-8PB00-0AA0 establishes the active IM/IM connection at the head of an ET 200PA SMART rack.
The paired layout joins two interface modules to one station while retaining clear physical coding and separate identity assignments.
Its rail position and cover arrangement complete the mechanical boundary around the active backplane connection.
Apter Power assists with pricing and access to official manufacturer documentation for Siemens 6ES7650-8PB00-0AA0 ET 200PA SMART Active IM/IM Bus Module.
Siemens 6ES7650-8PB00-0AA0 ET 200PA SMART Active IM/IM Bus Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
6ES7650-8PB00-0AA0 Interface Pairing
- Interface positions: The active module seats two IM 650-8PH interface modules.
- Station relationship: Both positions belong to one redundant ET 200PA SMART station.
- Identity records: The two IM positions use separate I&M slot assignments.
- Supply arrangement: A separate power supply is recommended for each interface module.
6ES7650-8PB00-0AA0 Active-Bus Continuity
- Insertion state: An IM 650-8PH can be inserted while the station is in RUN.
- Removal state: An IM 650-8PH can be removed while the station is in RUN.
- Backplane path: The interface pair remains connected through the active station bus.
- Scope: The exchange behavior applies to the two coded IM/IM positions.
6ES7650-8PB00-0AA0 Mechanical Sequence
- Mounting system: The module installs on the active-bus-module mounting rail.
- Rail position: A 530 mm rail uses the documented rightmost latch location.
- Included cover: The bus-module cover is supplied with the IM/IM module.
- End closure: A separately ordered backplane-bus cover closes the exposed bus end.
6ES7650-8PB00-0AA0 Position Identification
- Color code: Yellow marking identifies the two positions intended for IM 650-8PH.
- Module family: Both positions accept the same interface-module family.
- Standard variant: The final x=0 digit identifies the standard construction.
- Coated variant: The x=1 digit is reserved for the conformal-coated construction.