- DIN-rail electronics complete a factory-adjusted PR642x eddy current measuring chain
- Plug-in terminals support supply, signal output, and field wiring in a compact IP20 housing
- Standard and SF variants support condition monitoring and approved safety-related arrangements
Emerson CON041 / SNG-CON041 / SNG-CON041-SF supplies oscillator, linearization, and amplification functions for the matching PR642x probe.
The measuring chain can monitor slow axial displacement, fast radial vibration, position, eccentricity, and speed or key pulses on rotating machinery.
Confirm sensor pairing, calibrated range, target material, jumper selection, load, cable route, grounding, ambient limits, and approval conditions before commissioning.
Availability, condition, price, and shipping time for CON041 / SNG-CON041 / SNG-CON041-SF are confirmed during quotation.
Emerson CON041 / SNG-CON041 / SNG-CON041-SF Eddy Current Signal Converter Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The converter label identifies the matched sensor type and sensor serial number
- The sensor and converter are factory adjusted as one measuring chain
- Standard calibration uses a 42CrMo4 / AISI 4140 reference target
- For the −2...−18 V range, an output from −18...−22 V indicates that the distance between the probe and target is too large
- An output from −1...−2 V can indicate that the probe gap is too small, the sensor is damaged, or the sensor circuit is open
- An output from 0...−1 V indicates a converter fault or missing supply voltage
- CON041/SF is documented with supported PR6422, PR6423, or PR6424 sensor chains
- The SF version supports SIL 2 with systematic capability for SIL 3 applications
- CON041/SF operation uses the documented −35...65 °C ambient range
- Monitor radial or axial shaft displacement on turbines, compressors, pumps and fans
- Measure shaft position or eccentricity with a matched PR642x measuring chain
- Generate speed or key-pulse signals with a supported sensor and converter configuration