Features:
- 8 individual output channels rated at 24V DC with 2A continuous output current per point
- Optocoupler galvanic isolation for complete channel-by-channel electrical separation
- Individual channel protection via 8 fast-acting 2.55A FF fuses with dedicated red status LEDs
The Siemens 6ES5454-7LB11 digital output module is supplied under order code 6ES5 454-7LB11 as an original 8-channel 24V DC binary output hardware component.
Engineered specifically for SIMATIC S5-115U, S5-115H, and S5-115F controllers, this module converts internal CPU control commands into high-capacity 2A output switching signals for driving heavy field actuators.
The module requires a standard 24-pin front connector for signal wiring and occupies one single module slot in central controllers or expansion subracks.
The Siemens 6ES5454-7LB11 digital output module is discontinued and obsolete by the manufacturer (OEM).
Siemens 6ES5454-7LB11 Digital Output Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Drives high-power binary field devices including solenoid valves, power contactors, and alarm indicators.
- Executes fail-safe output switching commands within SIMATIC S5-115F safety controller configurations.
- Operates in central racks and expansion units for high-current digital control in factory automation lines.
- Integrates seamlessly with SIMATIC S5-115U, S5-115H, and S5-115F central units and expansion chassis racks.
- Interfaces via expansion interface modules including IM 307 and IM 317 for distributed input/output subracks.
- Compatible with S5-135U and S5-155U programmable controller racks when utilized with standard Siemens adapter casings.
- Delivers maximum switching frequencies of 100 Hz for resistive loads, 8 Hz for lamp loads, and 0.27 Hz for inductive loads.
- Maintains 100% full continuous load factor capacity at ambient operating temperatures up to 25°C (50% at 55°C).
- Operates with low internal power loss dissipation rated at typically 20 W under full load operation.
- Operates within a permissible load supply voltage range of 20V to 30V DC with maximum 3.6V ripple.
- Supports 100% full continuous load factor at ambient temperatures up to 25°C, derating to 50% at 55°C.
- Maintains low residual output leakage current under max 1 mA during "0" signal state conditions.